Mirrormotor
About the Mirrormotor PCB
Mirrormotor is an open source PCB design by hstarmans, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 48 × 67.8 mm, with 44 components from 7 distinct parts.
Other key parts include the TB67S149FG,EL. By type, the board carries 15 capacitors, 15 resistors, 10 connectors and 1 IC.
It belongs with the robotics & motion designs in this gallery.
From the project
Kicad design files for prism laser direct imager using up5k FPGA and ESP32
KiCad design files for the Hexastorm, an open-hardware prism laser direct imager. This project utilizes an ESP32-S3 and an iCE40 UP5K FPGA to achieve high-resolution, high-speed laser exposure.
The design files are organized into two primary categories:
MCU: ESP32-S3 (N32R8V) utilizing 8MB Octal PSRAM for rapid image buffering. FPGA: Lattice iCE40 UltraPlus 5k (UP5K) for nanosecond-level laser modulation and real-time synchronization with the prism index pulses. Vision & Alignment: Features a dedicated 24-pin FPC camera connector supporting the OV2640 sensor for precise laser alignment.…
Main components on the Mirrormotor
Mirrormotor bill of materials (BOM)
44 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TB67S149FG,EL NBC3111 | TB67S149FGEL | IC1 |
| 9 | R | R_0603_1608Metric | J1, J2, J3, J4, J5, J6, J7, J8 +1 |
| 1 | 292173-5 | 2921735 | J10 |
| 3 | HW101A | SOP190P290X130-4N | H1, H2, H3 |
| 15 | C | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +7 |
| 13 | R | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R10 +5 |
| 2 | R | R_1206_3216Metric | R8, R9 |
Mirrormotor design files
The KiCad project lives in the hstarmans/firestarter repository on GitHub; these links point at the commit this page was built from.
Mirrormotor: common questions
How big is the Mirrormotor PCB?
The Mirrormotor measures 48 × 67.8 mm, has 2 copper layers and is 0.89 mm thick.
How many components are on the Mirrormotor?
44 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mirrormotor design files?
From the hstarmans/firestarter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mirrormotor design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in firestarter
ESP32Firestarter
88.4 × 63.6 mm120 parts4LCC-BY-NC-4.09
Base
105.5 × 66 mm32 parts2LCC-BY-NC-4.09
Topplate
99.8 × 59 mm8 parts2LCC-BY-NC-4.09
Laserdiode
33.3 × 15.5 mm7 parts2LCC-BY-NC-4.09
Pcbmotor spiralarchimidean
48 × 45.9 mm5 parts4LCC-BY-NC-4.09
Sideplate
99.8 × 24.2 mm4 parts2LCC-BY-NC-4.09
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979