Pcbmotor spiralarchimidean
About the Pcbmotor spiralarchimidean PCB
Pcbmotor spiralarchimidean is an open source PCB design by hstarmans, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 48 × 45.9 mm, with 5 components from 3 distinct parts.
It belongs with the robotics & motion designs in this gallery.
From the project
Kicad design files for prism laser direct imager using up5k FPGA and ESP32
KiCad design files for the Hexastorm, an open-hardware prism laser direct imager. This project utilizes an ESP32-S3 and an iCE40 UP5K FPGA to achieve high-resolution, high-speed laser exposure.
The design files are organized into two primary categories:
MCU: ESP32-S3 (N32R8V) utilizing 8MB Octal PSRAM for rapid image buffering. FPGA: Lattice iCE40 UltraPlus 5k (UP5K) for nanosecond-level laser modulation and real-time synchronization with the prism index pulses. Vision & Alignment: Features a dedicated 24-pin FPC camera connector supporting the OV2640 sensor for precise laser alignment.…
Pcbmotor spiralarchimidean bill of materials (BOM)
5 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 3 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4 |
| 1 | Conn_01x01 | motorconnector_D8.0mm_Drill4.1mm | J5 |
Pcbmotor spiralarchimidean design files
The KiCad project lives in the hstarmans/firestarter repository on GitHub; these links point at the commit this page was built from.
Pcbmotor spiralarchimidean: common questions
How big is the Pcbmotor spiralarchimidean PCB?
The Pcbmotor spiralarchimidean measures 48 × 45.9 mm, has 4 copper layers and is 0.88 mm thick.
How many components are on the Pcbmotor spiralarchimidean?
5 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcbmotor spiralarchimidean design files?
From the hstarmans/firestarter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pcbmotor spiralarchimidean design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in firestarter
ESP32Firestarter
88.4 × 63.6 mm120 parts4LCC-BY-NC-4.09
Mirrormotor
48 × 67.8 mm44 parts2LCC-BY-NC-4.09
Base
105.5 × 66 mm32 parts2LCC-BY-NC-4.09
Topplate
99.8 × 59 mm8 parts2LCC-BY-NC-4.09
Laserdiode
33.3 × 15.5 mm7 parts2LCC-BY-NC-4.09
Sideplate
99.8 × 24.2 mm4 parts2LCC-BY-NC-4.09
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979