Corgikeychain
Hugoyhu·corgikeychain
About the Corgikeychain PCB
Corgikeychain is an open source Microchip SAM PCB design by Hugoyhu, published on GitHub. It is a 2-layer board measuring 79.7 × 88.2 mm, with 28 components from 11 distinct parts.
Its main chip is the ATSAMD21E18A-A, from the Microchip SAM family. Other key parts include the AP2112K-3.3. By type, the board carries 17 connectors, 4 capacitors, 2 ICs, 2 diodes, 2 resistors and 1 switch.
From the project
Corgi "keychain" LilyPad with ATSAMD21E18
Main components on the Corgikeychain
Corgikeychain bill of materials (BOM)
28 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD21E18A-A | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 15 | Conn_01x01_Female | PETAL-LONG-1-2SIDE | J1, J2, J3, J4, J5, J6, J7, J8 +7 |
| 1 | USB_C_Receptacle_USB2.0 | GCT_USB4085-GF-A_REVA | J15 |
| 1 | Conn_01x04_Female | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J16 |
| 1 | SW_Push | SW_SPST_B3U-3000P | SW1 |
| 1 | NSR0320 | D_SOD-323_HandSoldering | D1 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
Corgikeychain design files
The KiCad project lives in the Hugoyhu/corgikeychain repository on GitHub; these links point at the commit this page was built from.
Corgikeychain: common questions
What microcontroller does the Corgikeychain use?
The Corgikeychain is built around the ATSAMD21E18A-A, from the Microchip SAM family.
How big is the Corgikeychain PCB?
The Corgikeychain measures 79.7 × 88.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Corgikeychain?
28 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Corgikeychain design files?
From the Hugoyhu/corgikeychain repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Corgikeychain design in my own project?
The repository has no license, so all rights stay with Hugoyhu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Corgikeychain without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416