8 open source boards using the ATSAMD21E18A-A

Real designs built with the ATSAMD21E18A-A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the ATSAMD21E18A-A

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ATSAMD21E18A-A connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDCORE pin has a capacitor to GND on 6 of 7 designs, most often 1 µF (then 2.2 µF).
  • The PA27 pin is left unconnected on 7 of 7 designs.
  • The PA28 pin is left unconnected on 7 of 7 designs.
  • The VDDIN pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 1 µF).
PA01pin 2Connected to: Not connected 71% · a signal 29%
PA04pin 5Connected to: A connector 29% · not connected 29%
  • Series resistor on 43% · 330 Ω (1), 150 Ω (1), 220 Ω (1)
PA05pin 6Connected to: A connector 29% · not connected 29%
  • Series resistor on 43% · 47 kΩ (1), 150 Ω (1), 220 Ω (1)
PA06pin 7Connected to: A connector 29% · not connected 29%
  • Series resistor on 43% · 4.7 kΩ (1), 150 Ω (1), 220 Ω (1)
VDDANApin 9Connected to: 3.3V 71% · a signal 29%
  • Decoupling capacitor on 57% · 1 µF (2), 10 µF (2), 100 nF (1)
GNDpin 10, 28Connected to: GND 86%
PA09pin 12Connected to: A connector 43%
  • Pull-up to 3.3V on 43% · 4.7 kΩ (1), 1 kΩ (1), 10 kΩ (1)
PA10pin 13Connected to: A connector 29%
  • Series resistor on 57% · 1 kΩ (1), 1.5 kΩ (1), 150 Ω (1)
PA22pin 21Connected to: Not connected 57% · a signal 43%
  • Pull-up to 3.3V on 43% · 4.7 kΩ (2), 10 kΩ (1)
PA27pin 25Connected to: Not connected 100%
PA28pin 27Connected to: Not connected 100%
VDDCOREpin 29Connected to: Signal 86%
  • Capacitor to GND on 86% · 1 µF (5), 2.2 µF (1)
VDDINpin 30Connected to: 3.3V 86%
  • Decoupling capacitor on 71% · 10 µF (3), 1 µF (2), 100 nF (1)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pi TX 35W PA V2 by M0LTE, DSKY-digital indicator replica by rrainey, CFWatch by Dragon863 and Corgikeychain by Hugoyhu.

The ATSAMD21E18A-A in open source designs

The gallery holds 8 open source boards using the ATSAMD21E18A-A from 7 GitHub repositories; a typical one measures about 64.7 × 42.8 mm and carries around 38 components.

75% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Pi TX 35W PA V2 by M0LTE.

Parts used alongside the ATSAMD21E18A-A

Microcontrollers on boards using the ATSAMD21E18A-A

What boards using the ATSAMD21E18A-A are built for

ATSAMD21E18A-A: common questions

Where can I find a ATSAMD21E18A-A reference design?

Each of the 8 boards on this page is a real design using the ATSAMD21E18A-A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ATSAMD21E18A-A VDDCORE pin connected?

The VDDCORE pin has a capacitor to GND on 6 of 7 designs, most often 1 µF (then 2.2 µF). Counted from the KiCad layouts of 7 open source designs using the ATSAMD21E18A-A.

How is the ATSAMD21E18A-A PA27 pin connected?

The PA27 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the ATSAMD21E18A-A.

How is the ATSAMD21E18A-A PA28 pin connected?

The PA28 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the ATSAMD21E18A-A.

Which microcontrollers do boards using the ATSAMD21E18A-A use?

Most are built on Microchip SAM (8).

How big is a typical board using the ATSAMD21E18A-A?

The median is 64.7 × 42.8 mm, and 75% are two-layer designs.

What is the most popular open source board using the ATSAMD21E18A-A?

By GitHub stars, Pi TX 35W PA V2 by M0LTE, with 15 stars.

Can I simulate one of these boards using the ATSAMD21E18A-A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part