HardLabs

Jlcpcb skill mcp

hulryung·jlcpcb-skill-mcp·examples/esp32c3-sensor/esp32c3-sensor.kicad_sch

This repository ships a schematic but no board layout.
Simulate this board

About the Jlcpcb skill mcp PCB

Jlcpcb skill mcp is an open source ESP32 PCB design by hulryung, published on GitHub. It is a board, with 15 components from 13 distinct parts.

Its main chip is the NE555DR, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 6 resistors, 4 capacitors, 2 ICs, 1 connector, 1 switch and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

JLCPCB/LCSC part-suggestion MCP server + Claude Code skill: KiCad BOM analysis, tier/fee-aware ranking, assembly cost estimation

analyzekicad / suggestbomparts 도구 시연용 최소 KiCad 8 회로도 예제입니다. ESP32-C3(QFN-32), AMS1117-3.3 레귤레이터, USB-C 커넥터, 0603 저항/커패시터, LED, 택트 스위치 등 약 15개 부품으로 구성되어 있습니다. J1(USB-C)에는 LCSC, U2(AMS1117-3.3)에는 LCSC Part # 필드로 LCSC 부품 번호가 미리 지정되어 있고, R6은 DNP(미실장) 테스트용입니다. MCP 서버의 analyzekicad 도구에 이 파일 경로를 넘기면 BOM 라인이 추출됩니다.

Main components on the Jlcpcb skill mcp

NE555DRAMS1117-3.3

Jlcpcb skill mcp bill of materials (BOM)

15 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NE555DR
ESP32-C3
U1
1
AMS1117-3.3
U2
1
USB_C_Receptacle_USB2.0
J1
1
SW_Push
SW1
1
LED
D1
2
100NF
100nF
C1, C2
1
10uF
C3
1
22uF
C4
2
10K
10k
R1, R2
1
10K
5.1k
R3
1
25804
5.1k
R4
1
1k
R5
1
10k
R6

Jlcpcb skill mcp design files

The KiCad project lives in the hulryung/jlcpcb-skill-mcp repository on GitHub; these links point at the commit this page was built from.

Jlcpcb skill mcp: common questions

What microcontroller does the Jlcpcb skill mcp use?

The Jlcpcb skill mcp is built around the NE555DR, from the ESP32 family.

How many components are on the Jlcpcb skill mcp?

15 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Jlcpcb skill mcp design files?

From the hulryung/jlcpcb-skill-mcp repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Jlcpcb skill mcp design in my own project?

The repository has no license, so all rights stay with hulryung. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Jlcpcb skill mcp without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards