MainBoard v1
HuyVo117·Car-line-speedrun·MainBoard/MainBoard_v1.kicad_pcb
About the MainBoard v1 PCB
MainBoard v1 is an open source STM32 PCB design by HuyVo117, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 120 × 80 mm, with 165 components from 62 distinct parts.
Its main chip is the STM32F469VG, from the STM32 family. Other key parts include the SI7469DP-T1-GE3, LT1963A-TSSOP, TPS62143, ECS-2520S33 and INA260. By type, the board carries 55 resistors, 51 capacitors, 14 connectors, 11 ICs, 10 transistors and 9 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
This repository contains circuit data for line-following robot (UnderBird).
Main components on the MainBoard v1
MainBoard v1 bill of materials (BOM)
165 components, 62 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SI7469DP-T1-GE3 | SO-8_PowerPAK_Vishay_Single | U1 |
| 1 | LT1963A-TSSOP | TSSOP-16-1EP_4.4x5mm_Pitch0.65mm | U2 |
| 1 | TPS62143 | TPS62143RGTR | U3 |
| 1 | ECS-2520S33 | Crystal_SMD_2520-4pin_2.5x2.0mm | U4 |
| 2 | INA260 | TSSOP-16_4.4x5mm_Pitch0.65mm | U5, U9 |
| 2 | DRV8701E | DRV8701ERGET | U6, U10 |
| 1 | ICM20648 | ICM20648 | U7 |
| 1 | STM32F469VG | LQFP-100_14x14mm_Pitch0.5mm | U8 |
| 1 | MMC5983MA | MMC5983MA | U11 |
| 8 | AON7400B | DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | Q1, Q2, Q3, Q4, Q5, Q6, Q8, Q9 |
| 1 | 2N7002K | SOT-23 | Q7 |
| 1 | IRLML6344 | SOT-23 | Q10 |
| 1 | ILG | ILG_2pin | J1 |
| 2 | SH | JST_SH_BM04B-SRSS-TB_04x1.00mm_Straight | J2, J11 |
| 1 | STDC14 | PinHeader_2x07_P1.27mm_Vertical_SMD | J3 |
| 2 | PA | PA_2pin | J4, J9 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Hirose_DM3AT-SF-PEJM5 | J5 |
| 1 | SH | JST_SH_BM02B-SRSS-TB_02x1.00mm_Straight | J6 |
| 2 | ENC | Pin_Header_Straight_2x05_Pitch1.27mm | J7, J8 |
| 1 | SH | JST_SH_BM06B-SRSS-TB_06x1.00mm_Straight | J10 |
Show 42 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SH | JST_SH_BM03B-SRSS-TB_03x1.00mm_Straight | J12, J14 |
| 1 | FFC | Molex_FFC_18 | J13 |
| 1 | SMT-0440-S-R | SMT-0440-S-R | BZ1 |
| 1 | SH | JST_SH_BM04B-SRSS-TB_04x1.00mm_Straight | SH1 |
| 1 | SKRPACE010 | SKRPACE010 | SW1 |
| 1 | SSSS213202 | SSSS213202 | SW2 |
| 1 | FR01SC16P-S | FR01SC16P | SW3 |
| 1 | SKRHAAE010 | SKRHAAE010 | SW4 |
| 1 | OSTB0603C1C-A | OSTB0603C1C-A | LED1 |
| 2 | SS2040FL | D_SOD-123F | D1, D7 |
| 1 | SZ1SMB5930BT3G | 1SMB5930BT3G | D2 |
| 1 | 1SMB5920BT3G | 1SMB5930BT3G | D3 |
| 5 | OSTG1608C1A | LED_0603 | D4, D5, D6, D8, D9 |
| 1 | 330 | L_0603 | FB1 |
| 6 | 60 | L_0603 | FB2, FB3, FB4, FB5, FB6, FB7 |
| 1 | IHLP1212BZER2R2M11 | IHLP1212BZER2R2M11 | L1 |
| 16 | 0.1u | C_0603 | C1, C12, C13, C17, C19, C20, C31, C32 +8 |
| 1 | 100u | CP_Elec_6.3x5.9 | C2 |
| 5 | 47u | C_1210 | C3, C4, C8, C11, C33 |
| 4 | 22u | C_0805 | C5, C7, C9, C10 |
| 1 | 3.3n | C_0603 | C6 |
| 17 | 1u | C_0603 | C14, C16, C18, C21, C22, C23, C24, C25 +9 |
| 2 | 2.2u | C_0603 | C15, C40 |
| 1 | 4.7u | C_0603 | C27 |
| 2 | 100u | CP_Elec_5x5.8 | C28, C44 |
| 2 | 10u | C_0603 | C34, C45 |
| 11 | 10k | R_0603 | R1, R6, R11, R12, R24, R25, R26, R27 +3 |
| 1 | 100k | R_0603 | R2 |
| 1 | 5k | R_0603 | R3 |
| 1 | 2k | R_0603 | R4 |
| 3 | 390 | R_0603 | R5, R48, R49 |
| 18 | R | R_0603 | R7, R10, R21, R22, R34, R35, R36, R37 +10 |
| 2 | 4.7k | R_0603 | R8, R9 |
| 2 | 33k | R_0603 | R13, R31 |
| 7 | 22k | R_0603 | R14, R15, R16, R17, R18, R19, R20 |
| 2 | 45 | R_0603 | R23, R53 |
| 2 | 2.7k | R_0603 | R32, R33 |
| 1 | 1.2k | R_0603 | R50 |
| 1 | 680 | R_0603 | R51 |
| 1 | 470 | R_0603 | R52 |
| 1 | 47k | R_0603 | R54 |
| 1 | 4.7k | R_Array_Convex_4x1206 | RN1 |
MainBoard v1 design files
The KiCad project lives in the HuyVo117/Car-line-speedrun repository on GitHub; these links point at the commit this page was built from.
MainBoard v1: common questions
What microcontroller does the MainBoard v1 use?
The MainBoard v1 is built around the STM32F469VG, from the STM32 family.
How big is the MainBoard v1 PCB?
The MainBoard v1 measures 120 × 80 mm, has 2 copper layers and is 0.2 mm thick.
How many components are on the MainBoard v1?
165 components, from 62 distinct parts. The full bill of materials is listed on this page.
Where can I download the MainBoard v1 design files?
From the HuyVo117/Car-line-speedrun repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MainBoard v1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which HuyVo117 chose for the repository.
Can I test firmware for the MainBoard v1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Car-line-speedrun
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k