6 open source boards using the TPS62143

Real designs built with the TPS62143, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TPS62143

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPS62143 connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pins have a inductor on 5 of 6 designs, most often 2.2 µH.
  • The SS/TR pin has a capacitor to GND on 5 of 5 designs, most often 3.3 nF (then 3.3 µF).
  • The VIN pins have a capacitor to GND on 5 of 5 designs, most often 10 µF (then 22 µF).
  • The EN pin has a capacitor to GND on 5 of 5 designs, most often 10 µF (then 22 µF).
SWpin 1, 2, 3Connected to: Signal 94%
  • Inductor on 83% · 2.2 µH (9)
PGpin 4Connected to: Signal 83% · 12V 17%
  • Series resistor on 50% · 100 kΩ (2), 5.1 kΩ (1)
  • Pull-up to 5V on 33% · 100 kΩ (2)
FBpin 5Connected to: GND 67% · not connected 17% · 12V 17%
GNDpin 6, 15, 16, 17Connected to: GND 95%
FSWpin 7Connected to: GND 100%
DEFpin 8Connected to: GND 100%
SS/TRpin 9Connected to: Signal 100%
  • Capacitor to GND on 100% · 3.3 nF (4), 3.3 µF (1)
VINpin 10, 11, 12Connected to: DMP4065S-7 20%, DRV8833PW 20%, another IC 20%
  • Capacitor to GND on 100% · 10 µF (12), 22 µF (6), 47 µF (6)
ENpin 13Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (4), 22 µF (2), 47 µF (2)
VOSpin 14Connected to: Signal 60% · 5V 40%
  • Inductor on 100% · 2.2 µH (3)
  • Capacitor to GND on 60% · 22 µF (3), 10 µF (1), 100 nF (1)
  • Series resistor on 60% · 100 kΩ (2), 330 Ω (2), 5.1 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ADF4158 PCB by daniestevez, MainBoard v1 by shimotoriharuki, MQB Monitor Hardware by akcase18 and MainBoard v1 by HuyVo117.

The TPS62143 in open source designs

The gallery holds 6 open source boards using the TPS62143 from 6 GitHub repositories; a typical one measures about 80 × 59.6 mm and carries around 110 components.

50% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is ADF4158 PCB by daniestevez.

Microcontrollers on boards using the TPS62143

What boards using the TPS62143 are built for

TPS62143: common questions

Where can I find a TPS62143 reference design?

Each of the 6 boards on this page is a real design using the TPS62143. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS62143 SW pin connected?

The SW pins have a inductor on 5 of 6 designs, most often 2.2 µH. Counted from the KiCad layouts of 6 open source designs using the TPS62143.

How is the TPS62143 SS/TR pin connected?

The SS/TR pin has a capacitor to GND on 5 of 5 designs, most often 3.3 nF (then 3.3 µF). Counted from the KiCad layouts of 6 open source designs using the TPS62143.

How is the TPS62143 VIN pin connected?

The VIN pins have a capacitor to GND on 5 of 5 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 6 open source designs using the TPS62143.

What parts are used alongside the TPS62143?

The AMS1117-3.3, DRV8701E, ECS-2520S33, ICM20648 and INA260 appear in the most repositories here.

Which microcontrollers do boards using the TPS62143 use?

Most are built on ESP32 (2) and STM32 (2).

How big is a typical board using the TPS62143?

The median is 80 × 59.6 mm, and 50% are two-layer designs.

What is the most popular open source board using the TPS62143?

By GitHub stars, ADF4158 PCB by daniestevez, with 30 stars.

Can I simulate one of these boards using the TPS62143 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part