5 open source boards using the ICM20648

Real designs built with the ICM20648, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The ICM20648 in open source designs

The gallery holds 5 open source boards using the ICM20648 from 3 GitHub repositories; a typical one measures about 91 × 67.7 mm and carries around 165 components.

100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is MainBoard v1 by shimotoriharuki.

Microcontrollers on boards using the ICM20648

What boards using the ICM20648 are built for

ICM20648: common questions

Where can I find a ICM20648 reference design?

Each of the 5 boards on this page is a real design using the ICM20648. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ICM20648?

The DRV8701E, ECS-2520S33, INA260, LT1963A-TSSOP and MMC5983MA appear in the most repositories here.

Which microcontrollers do boards using the ICM20648 use?

Most are built on STM32 (5).

How big is a typical board using the ICM20648?

The median is 91 × 67.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the ICM20648?

By GitHub stars, MainBoard v1 by shimotoriharuki, with 3 stars.

Can I simulate one of these boards using the ICM20648 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part