54 open source boards using the MMC5983MA
Real designs built with the MMC5983MA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Shirley-FC-Dev-Board
Bare-Metal-Foundry
56 × 46 mm110 parts4LNo license31Slimenrfaux
SlimeVR
40 × 20 mm24 parts2LNo license30Meowality
gatecat
200 × 75 mm248 parts6LISC17RP2040/RP2350
Active drag system
RocketryVT
33 × 90 mm75 parts4LMIT6STM32
TeleSTERN
shorlee
90 × 45 mm293 parts6LGPL-3.03ESP32
PTR mega hardware
PTR-projects
31 × 100 mm203 parts4LMIT3STM32
MainBoard v1
shimotoriharuki
120 × 80 mm165 parts2LGPL-3.03ESP32
Rotini-Hardware
AlfredoSystems
47 × 21.6 mm105 parts4LMIT3ESP32
PickleRick
icl-rocketry
100 × 37 mm196 parts6LMIT2STM32
IRIS
teletype7
50 × 100 mm160 parts4LMIT2Raspberry Pi
CompactPi
loganrf
47 × 105 mm147 parts6LCERN-OHL-S-2.02STM32
NoNameComputer-2.0
PlanAndBuild
40 × 100 mm107 parts4LNo license2Microchip SAM
Mainboard before drastic
Sierra-Lobo
90.2 × 101.1 mm353 parts6LCC-BY-SA-4.01RP2040/RP2350
Avionics-Mainboard
cmu-argus-2
90.2 × 95.9 mm316 parts4LNo license1RP2040/RP2350
StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1ESP32
DangerDoughnut
gavin4d
50 × 37 mm152 parts4LNo license1ChariotFC
Rispats
272.4 × 570.4 mm106 parts2LNo license1ESP32
Altimeter
icl-rocketry
37.5 × 25 mm80 parts4LNo license1ESP32
OpenSourceDrone
CGainsWorks
497.4 × 154.7 mm1182 parts6LNo license0ESP32
Emb drone flight stack
CGainsWorks
497.4 × 154.7 mm1182 parts6LNo license0ESP32
CanSat
budabalint
54 × 52 mm439 parts4LNo license0STM32
Production
someonelse20
82 × 82 mm190 parts4LNo license0STM32
MainBoard v1
HuyVo117
120 × 80 mm165 parts2LGPL-3.00STM32
CANSAT-M2-2026
Engineer162
55 × 100 mm156 parts4LCERN-OHL-S-2.00STM32
OshTelemega
Kev1n8088
30 × 80 mm151 parts4LNo license0RP2040/RP2350
Version2
rice-eclipse
50.8 × 87 mm130 parts4LNo license0STM32
Flight controller
someonelse20
70 × 70 mm116 parts4LNo license0STM32
SmallAvionic
rayho6240-arch
76.8 × 61.5 mm95 parts4LNo license0STM32
--MagneticField---Acceleration-Sensors
ahoang205
76.1 × 74.9 mm92 parts2LMIT0RP2040/RP2350
Simple-FC
someonelse20
40 × 40 mm72 parts4LMIT0STM32
FC-DRON-P3
Lucas-el-pato
40.7 × 40.7 mm71 parts6LNo license0Microchip SAM
Tempo bt
rrainey
58.4 × 54 mm59 parts4LGPL-3.00STM32
Stm32logger
Birb-jpg
30 × 30 mm59 parts2LNo license0RP2040/RP2350
Berryboard
curtisgalloway
56 × 65 mm58 parts2LNo license0RP2040/RP2350
Active drag system minimal
RocketryVT
33 × 81.8 mm67 parts4LMIT6MSPM0
mhered
68 × 33 mm36 parts2LNo license2
How designs wire the MMC5983MA
Read from the KiCad layouts of 43 open source designs, one per repository: what each pin of the MMC5983MA connects to, and the resistors, capacitors and other passives placed on it.
- The CAP pin has a capacitor to GND on 41 of 42 designs, most often 10 µF (then 4.7 µF).
- The VDDIO pin has a decoupling capacitor on 38 of 42 designs, most often 100 nF (then 1 µF).
- The VDD pin has a decoupling capacitor on 36 of 43 designs, most often 100 nF (then 1 µF).
- The SDA/SPI_SDI pin has a pull-up to 3.3V on 20 of 42 designs, most often 2.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCL/SPI_SCKpin 1 | Connected to: The microcontroller 49%, a connector 21% |
|
| VDDpin 2 | Connected to: 3.3V 91% |
|
| NCpin 3, 6, 7, 8, 12, 14 | Connected to: Not connected 97% | — |
| SPI_CSpin 4 | Connected to: 3.3V 47% · a signal 47% |
|
| GNDpin 9, 11 | Connected to: GND 98% | — |
| CAPpin 10 | Connected to: Signal 98% |
|
| VDDIOpin 13 | Connected to: 3.3V 90% |
|
| SDA/SPI_SDIpin 16 | Connected to: The microcontroller 50%, a connector 21% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Shirley-FC-Dev-Board by Bare-Metal-Foundry, MIDAS Mini MK1 by ISSUIUC, Slimenrfaux by SlimeVR and Meowality by gatecat.
The MMC5983MA in open source designs
The gallery holds 54 open source boards using the MMC5983MA from 43 GitHub repositories; a typical one measures about 55.5 × 63.3 mm and carries around 100 components.
80% use four copper layers or more, and 41% carry an open source license.
The most starred is MIDAS Mini MK1 by ISSUIUC.
Parts used alongside the MMC5983MA
Microcontrollers on boards using the MMC5983MA
What boards using the MMC5983MA are built for
MMC5983MA: common questions
Where can I find a MMC5983MA reference design?
Each of the 54 boards on this page is a real design using the MMC5983MA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MMC5983MA CAP pin connected?
The CAP pin has a capacitor to GND on 41 of 42 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 43 open source designs using the MMC5983MA.
What decoupling capacitors do designs use on the MMC5983MA VDDIO pin?
The VDDIO pin has a decoupling capacitor on 38 of 42 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 43 open source designs using the MMC5983MA.
What decoupling capacitors do designs use on the MMC5983MA VDD pin?
The VDD pin has a decoupling capacitor on 36 of 43 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 43 open source designs using the MMC5983MA.
What parts are used alongside the MMC5983MA?
The BMP390, H3LIS331DLTR, ICM-42688-P, BMP581 and MAX-M10S appear in the most repositories here.
Which microcontrollers do boards using the MMC5983MA use?
Most are built on STM32 (18), ESP32 (12), RP2040/RP2350 (9) and Microchip SAM (4).
How big is a typical board using the MMC5983MA?
The median is 55.5 × 63.3 mm, and 20% are two-layer designs.
What is the most popular open source board using the MMC5983MA?
By GitHub stars, MIDAS Mini MK1 by ISSUIUC, with 31 stars.
Can I simulate one of these boards using the MMC5983MA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.