MD-100 Emulator
About the MD-100 Emulator PCB
MD-100 Emulator is an open source PIC PCB design by hwreverse, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 61.2 × 47 mm, with 43 components from 21 distinct parts.
Its main chip is the PIC18F452-IPT, from the PIC family. Other key parts include the 24LC1025, 74HC00 and 74HC02. By type, the board carries 21 resistors, 8 capacitors, 7 ICs, 3 connectors, 2 diodes and 1 transistor.
From the project
Sources pour les séquences de cours sur Twitch/Youtube (Alexx_and_seb) sur le PCB Design
Main components on the MD-100 Emulator
MD-100 Emulator bill of materials (BOM)
43 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 24LC1025 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4 |
| 1 | 74HC00 | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | 74HC02 | SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | PIC18F452-IPT | TQFP-44_10x10mm_P0.8mm | U7 |
| 1 | NPN | SOT-23 | Q1 |
| 1 | 4MHz | Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | CPB_Connector | Connector_Casio_2x15_1.27_SYSBUS | J1 |
| 1 | I2CConn | PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | ICSP | PinHeader_1x05_P2.54mm_Horizontal | J3 |
| 1 | GRN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | BAV70 | SOT-23 | D2 |
| 1 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 3 | 0.1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C7, C8 |
| 4 | 15pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C5, C6 |
| 10 | 330R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
| 1 | 22K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | 4K7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 47K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 2 | 10K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14, R15 |
| 5 | 100k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R17, R19, R20, R21 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R18 |
MD-100 Emulator design files
The KiCad project lives in the hwreverse/CoursPCBDesign repository on GitHub; these links point at the commit this page was built from.
MD-100 Emulator: common questions
What microcontroller does the MD-100 Emulator use?
The MD-100 Emulator is built around the PIC18F452-IPT, from the PIC family.
How big is the MD-100 Emulator PCB?
The MD-100 Emulator measures 61.2 × 47 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the MD-100 Emulator?
43 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the MD-100 Emulator design files?
From the hwreverse/CoursPCBDesign repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MD-100 Emulator design in my own project?
Yes, under the terms of its CC0-1.0 license, which hwreverse chose for the repository.
Can I test firmware for the MD-100 Emulator without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in CoursPCBDesign
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICLens
ervanalb
80 × 80 mm53 parts4LNo license515
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376