RS232-Adapter

HyFiVeUser·HyFiVe·01_Logger/02_Modular_Logger/01_Electronics/02_Adapter/RS232-Adapter/RS232-Adapter.kicad_pcb

RS232-Adapter PCB layout, top view — open source TI MSP430/CC board by HyFiVeUser

About the RS232-Adapter PCB

RS232-Adapter is an open source TI MSP430/CC PCB design by HyFiVeUser, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 74.3 × 32.2 mm, with 29 components from 19 distinct parts.

Its main chip is the MSP430FR2673, from the TI MSP430/CC family. Other key parts include the MAX3221E. By type, the board carries 14 capacitors, 5 crystals, 3 resistors, 2 ICs, 2 switches and 2 diodes.

It belongs with the sensors, iot & wireless and power & battery designs in this gallery.

From the project

1. LED Connector: Allows for the connection of LED indicators to provide visual status information. 2. BMS Serial Interface: Enables communication with the Battery Management System (BMS) for monitoring and controlling parameters. 3. NTC Sensor Connector for Battery Charging: Con

1. LED Connector: Allows for the connection of LED indicators to provide visual status information. 2. BMS Serial Interface: Enables communication with the Battery Management System (BMS) for monitoring and controlling parameters. 3. NTC Sensor Connector for Battery Charging: Connects to an NTC sensor to monitor battery temperature during charging for safety. 4. Wi-Fi Antenna Connector: Attachment point for a Wi-Fi antenna to enable wireless communication. 5. Charging Connector: Port for connecting a power source to charge the battery. 6. UART Serial Port Connector for ESP32: Allows for…

RS232-Adapter, from the project README
From the project README

Main components on the RS232-Adapter

MSP430FR2673MAX3221E

RS232-Adapter bill of materials (BOM)

29 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MSP430FR2673
IC201
1
MAX3221E
IC301
1
ESQ-104-14-G-D
X201
1
Conn_02x03_Counter_Clockwise
X202
1
Conn_01x03
X203
1
Molex Nano-Fit 105314-1114
X301
1
9HT11-32.768KDZF-T
Y201
1
SSM3K127TU
K301
1
SKRKAEE020
SW201
1
A6H-8101
SW202
2
SMBJ8.0CA
D301, D302
1
1nF
C201
1
1µF, <200m ESR
C202
2
20pF
C203, C204
8
100nF
C205, C301, C302, C303, C304, C305, C306, C307
1
1µF
C206
1
4,7µF
C207
1
330
R202
2
10k NB
R203, R204

RS232-Adapter design files

The KiCad project lives in the HyFiVeUser/HyFiVe repository on GitHub; these links point at the commit this page was built from.

RS232-Adapter: common questions

What microcontroller does the RS232-Adapter use?

The RS232-Adapter is built around the MSP430FR2673, from the TI MSP430/CC family.

How big is the RS232-Adapter PCB?

The RS232-Adapter measures 74.3 × 32.2 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the RS232-Adapter?

29 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RS232-Adapter design files?

From the HyFiVeUser/HyFiVe repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RS232-Adapter design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which HyFiVeUser chose for the repository.

Can I test firmware for the RS232-Adapter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

More boards in HyFiVe

Similar boards