Edf esc
iamdarshg·edf-esc·hardware/edf-esc.kicad_pcb
About the Edf esc PCB
Edf esc is an open source PCB design by iamdarshg, published on GitHub under the MIT license. It is a 4-layer board measuring 98 × 58 mm, with 74 components from 4 distinct parts.
Other key parts include the XC6206P332MR and XL1509-ADJ.
It belongs with the robotics & motion designs in this gallery.
From the project
Open hardware and firmware for a compact 98 mm × 58 mm, four-layer board with two independent 6S sensorless BLDC/EDF controller channels.
Open hardware and firmware for a compact 98 mm × 58 mm, four-layer board with two independent 6S sensorless BLDC/EDF controller channels.
- two electrically independent power paths; no shared 300 A PCB segment; - 18 × SFS06R025GF per channel, three devices per switch; - DRV8300D gate driver and PY32F030K28U6TR controller per channel; - high-side copper-shunt/INA190A3 current sensing with four-wire calibration; - sensorless six-step control with PWM throttle and shared SPI/separate CS; - shared 12 V gate supply, 5 V/8 A characterization-target BEC, and 3.3 V logic; - JLCPCB/LCSC-first…
Main components on the Edf esc
Edf esc bill of materials (BOM)
74 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206P332MR | SOT23-3 | U3V3 |
| 1 | XL1509-ADJ | SOIC8 | U12V |
| 36 | SFS06R025GF | PDFN56 | QA1, QA2, QA3, QA4, QA5, QA6, QA7, QA8 +28 |
| 36 | 4R7 | R_0603 | RGA1, RGA2, RGA3, RGA4, RGA5, RGA6, RGA7, RGA8 +28 |
Edf esc design files
The KiCad project lives in the iamdarshg/edf-esc repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/edf-esc.kicad_pcb
- Schematichardware/edf-esc.kicad_sch
Edf esc: common questions
How big is the Edf esc PCB?
The Edf esc measures 98 × 58 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Edf esc?
74 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Edf esc design files?
From the iamdarshg/edf-esc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Edf esc design in my own project?
Yes, under the terms of its MIT license, which iamdarshg chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979