PICUINO
About the PICUINO PCB
PICUINO is an open source AVR/Arduino PCB design by icarofcb, published on GitHub. It is a 2-layer board measuring 68.9 × 53.6 mm, with 39 components from 22 distinct parts.
Its main chip is the Arduino_UNO_R3, from the AVR/Arduino family. Other key parts include the PIC18F46Q24-I/PT and TPS7A2633DRVR. By type, the board carries 17 capacitors, 8 resistors, 5 diodes, 3 ICs, 3 connectors and 1 module.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Arduino based PIC18F46Q24 development board
Main components on the PICUINO
PICUINO bill of materials (BOM)
39 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC18F46Q24-I/PT PIC18F46Q24-I_PT Microchip | QFP80P1200X1200X120-44N | IC1 |
| 1 | TPS7A2633DRVR Texas Instruments | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | IC2 |
| 1 | TPS7A2633DRVR TPS7A2618DRVR Texas Instruments | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | IC5 |
| 1 | Arduino_UNO_R3 | Arduino_UNO_R3 | A1 |
| 1 | Conn_PIC_ICSP_ICD | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | 1V8-pins | PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | USB4105-GF-A GCT | GCT_USB4105-GF-A | J9 |
| 1 | PTS810SJK250SMTRLFS C&K | PTS810SJK250SMTRLFS | S2 |
| 2 | 150060GS75000 LED-GREEN Würth Elektronik | LED_0603_1608Metric | D1, D5 |
| 1 | B5819W Yangzhou Yangjie Electronic Technology Co.,Ltd | D_SOD-123 | D2 |
| 2 | CDBU40-HF Comchip Technology | D_0603_1608Metric | D4, D7 |
| 1 | LSMCC201208T420RG Taiyo Yuden | L_0805_2012Metric | L1 |
| 4 | GRM21BZ71A226ME15L 22uF Murata Electronics | C_0805_2012Metric | C1, C15, C32, C37 |
| 2 | GRM155R70J105KA12D 1uF Murata Electronics | C_0402_1005Metric | C2, C29 |
| 4 | GCJ188R71E104KA12D 100nF Murata Electronics | C_0603_1608Metric | C3, C4, C5, C6 |
| 2 | GRM188Z71A106KA73D 10uF Murata Electronics | C_0603_1608Metric | C12, C47 |
| 3 | GCM155R71C224KE02D 220nF Murata Electronics | C_0402_1005Metric | C16, C17, C18 |
| 2 | GRT188R61E106ME13D 10uF Murata Electronics | C_0603_1608Metric | C19, C20 |
| 3 | 220R YAGEO | R_0603_1608Metric | R1, R5, R43 |
| 2 | AC0603JR-104K7L 4.7k YAGEO | R_0603_1608Metric | R2, R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC0603FR-0710KP 10k YAGEO | R_0603_1608Metric | R4 |
| 2 | ERJ-2RKF5101X 5.1K Panasonic Electronic Components | R_0603_1608Metric | R44, R45 |
PICUINO design files
The KiCad project lives in the icarofcb/PICUINO repository on GitHub; these links point at the commit this page was built from.
PICUINO: common questions
What microcontroller does the PICUINO use?
The PICUINO is built around the Arduino_UNO_R3, from the AVR/Arduino family.
How big is the PICUINO PCB?
The PICUINO measures 68.9 × 53.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PICUINO?
39 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PICUINO design files?
From the icarofcb/PICUINO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PICUINO design in my own project?
The repository has no license, so all rights stay with icarofcb. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PICUINO without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k