41 open source boards using the TPS7A2633DRVR

Real designs built with the TPS7A2633DRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

41 boardsClear filters|Most starred

How designs wire the TPS7A2633DRVR

Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the TPS7A2633DRVR connects to, and the resistors, capacitors and other passives placed on it.

  • The PG pin is left unconnected on 23 of 25 designs (GND on 2).
  • The OUT pin is tied to 3.3V on 20 of 25 designs (a signal on 5).
  • The IN pin is tied to VCC on 19 of 25 designs (a signal on 6).
  • The EN pin is tied to VCC on 18 of 25 designs (a signal on 7).
OUTpin 1Connected to: 3.3V 80% · a signal 20%
NCpin 2Connected to: Not connected 100%
PGpin 3Connected to: Not connected 92%
ENpin 4Connected to: VCC 72% · a signal 28%
GNDpin 5Connected to: GND 84% · a signal 16%
INpin 6Connected to: VCC 76% · a signal 24%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Inkplate10 Soldered by SolderedElectronics, Soldered-Inkplate-2-hardware design by SolderedElectronics, Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics and Inkplate 6 SS panel by SolderedElectronics.

The TPS7A2633DRVR in open source designs

The gallery holds 41 open source boards using the TPS7A2633DRVR from 26 GitHub repositories; a typical one measures about 130.6 × 75.2 mm and carries around 202 components.

93% are two-layer designs, the rest use four layers or more, and 95% carry an open source license.

The most starred is Zerowriter Inkplate 5 Gen2 by zerowriter.

Microcontrollers on boards using the TPS7A2633DRVR

TPS7A2633DRVR: common questions

Where can I find a TPS7A2633DRVR reference design?

Each of the 41 boards on this page is a real design using the TPS7A2633DRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS7A2633DRVR PG pin connected?

The PG pin is left unconnected on 23 of 25 designs (GND on 2). Counted from the KiCad layouts of 25 open source designs using the TPS7A2633DRVR.

How is the TPS7A2633DRVR OUT pin connected?

The OUT pin is tied to 3.3V on 20 of 25 designs (a signal on 5). Counted from the KiCad layouts of 25 open source designs using the TPS7A2633DRVR.

How is the TPS7A2633DRVR IN pin connected?

The IN pin is tied to VCC on 19 of 25 designs (a signal on 6). Counted from the KiCad layouts of 25 open source designs using the TPS7A2633DRVR.

What parts are used alongside the TPS7A2633DRVR?

The CH340C, ESP32-WROVER, TPS3840PL27DBVR, PCAL6416AHF,128 and MC14093BDTR2G appear in the most repositories here.

Which microcontrollers do boards using the TPS7A2633DRVR use?

Most are built on ESP32 (27), AVR/Arduino (8), ESP8266 (4) and STM32 (1).

How big is a typical board using the TPS7A2633DRVR?

The median is 130.6 × 75.2 mm, and 93% are two-layer designs.

What is the most popular open source board using the TPS7A2633DRVR?

By GitHub stars, Zerowriter Inkplate 5 Gen2 by zerowriter, with 46 stars.

Can I simulate one of these boards using the TPS7A2633DRVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part