Ricardo-CapacitanceFillSensor
About the Ricardo-CapacitanceFillSensor PCB
Ricardo-CapacitanceFillSensor is an open source PCB design by icl-rocketry, published on GitHub. It is a 2-layer board measuring 18.5 × 36 mm, with 16 components from 9 distinct parts.
Other key parts include the FDC2212QDNTTQ1. By type, the board carries 8 capacitors, 3 connectors, 2 inductors, 2 resistors and 1 IC.
It belongs with the sensors designs in this gallery.
Main components on the Ricardo-CapacitanceFillSensor
Ricardo-CapacitanceFillSensor bill of materials (BOM)
16 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FDC2212QDNTTQ1 | SON50P400X400X100-13N | IC1 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | Molex_Nano-Fit_105313-xx04_1x04_P2.50mm_Horizontal | J1 |
| 2 | CONN_01X02_PIN Conn_01x02_Pin | Molex_Nano-Fit_105313-xx02_1x02_P2.50mm_Horizontal | J3, J4 |
| 2 | 18U 18u | L_1210_3225Metric | L1, L2 |
| 2 | 33P 33p | C_0402_1005Metric | C3, C4 |
| 4 | 18P 18p | C_0402_1005Metric | C5, C6, C7, C8 |
| 1 | 0.1U 0.1u | C_0402_1005Metric | C9 |
| 1 | 1u | C_0402_1005Metric | C10 |
| 2 | 1k | R_0402_1005Metric | R3, R4 |
Ricardo-CapacitanceFillSensor design files
The KiCad project lives in the icl-rocketry/Ricardo-CapacitanceFillSensor repository on GitHub; these links point at the commit this page was built from.
Ricardo-CapacitanceFillSensor: common questions
How big is the Ricardo-CapacitanceFillSensor PCB?
The Ricardo-CapacitanceFillSensor measures 18.5 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ricardo-CapacitanceFillSensor?
16 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ricardo-CapacitanceFillSensor design files?
From the icl-rocketry/Ricardo-CapacitanceFillSensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ricardo-CapacitanceFillSensor design in my own project?
The repository has no license, so all rights stay with icl-rocketry. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956