HardLabs

Arduino-Haptic-Driver-Shield

id-studiolab·Arduino-Haptic-Driver-Shield·hw/HapticDriverShield_V10.kicad_pcb

Arduino-Haptic-Driver-Shield layout, top view — open source AVR/Arduino board by id-studiolab

About the Arduino-Haptic-Driver-Shield

Arduino-Haptic-Driver-Shield is an open source AVR/Arduino PCB design by id-studiolab, published on GitHub. It is a 2-layer board measuring 68.7 × 53.6 mm, with 45 components from 14 distinct parts.

Its main chip is the ARDUINO_SHIELD, from the AVR/Arduino family. Other key parts include the DRV2605L and TCA9548APWR. By type, the board carries 14 resistors, 12 capacitors, 8 connectors, 5 ICs, 4 switches and 1 jumper.

It belongs with the dev boards & breakouts designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

Arduino shield containing four TI 2605 haptic driver ICs.

Main components on the Arduino-Haptic-Driver-Shield

DRV2605LTCA9548APWR

Arduino-Haptic-Driver-Shield bill of materials (BOM)

45 components, 14 distinct parts.

QtyPartRefs
4
DRV2605L
U00, U10, U20, U30
1
TCA9548APWR
U40
4
Conn_01x02
J00, J10, J20, J30
1
USB_B_Micro
J60
1
Jack-DC
J61
2
AudioJack3_Ground
J70, J71
1
Jumper_NC_Dual
JP60
1
ARDUINO_SHIELD
SHIELD00
4
450301014042
SW00, SW10, SW20, SW30
9
1uF
C00, C01, C10, C11, C20, C21, C30, C31 +1
2
100nF
C40, C60
1
10uF
C62
4
1K
R00, R10, R20, R30
10
4K7
R01, R02, R11, R12, R21, R22, R31, R32 +2

Arduino-Haptic-Driver-Shield design files

The KiCad project lives in the id-studiolab/Arduino-Haptic-Driver-Shield repository on GitHub; these links point at the commit this page was built from.

Arduino-Haptic-Driver-Shield: common questions

What microcontroller does the Arduino-Haptic-Driver-Shield use?

The Arduino-Haptic-Driver-Shield is built around the ARDUINO_SHIELD, from the AVR/Arduino family.

How big is the Arduino-Haptic-Driver-Shield?

The Arduino-Haptic-Driver-Shield measures 68.7 × 53.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino-Haptic-Driver-Shield?

45 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino-Haptic-Driver-Shield design files?

From the id-studiolab/Arduino-Haptic-Driver-Shield repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Arduino-Haptic-Driver-Shield design in my own project?

The repository has no license, so all rights stay with id-studiolab. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arduino-Haptic-Driver-Shield without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Earlier revisions in the repo: HapticDriverShield

Similar boards