9 open source boards using the DRV2605L
Real designs built with the DRV2605L, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Untitled
AlaaSaadAbdo
287.8 × 126.7 mm253 parts2LCC-BY-NC-4.0189Hivemind
agenticaiuw
30.2 × 33.7 mm29 parts2LNo license1AVR/Arduino
Arduino-Haptic-Driver-Shield
id-studiolab
68.7 × 53.6 mm45 parts2LNo license0ESP32
Zap bracelet
Raf3-Tech
30.1 × 12 mm34 parts4LNo license0- schematic only · 16 partsNordic nRF
AEGIS
callmerishi1508
16 partsAGPL-3.00 Barghoot
AlaaSaadAbdo
251.3 × 108.7 mm186 parts2LCC-BY-NC-4.0189Wired wizza
AlaaSaadAbdo
273.8 × 90.9 mm174 parts2LCC-BY-NC-4.0189DS Special Object
JoelEB
59.9 × 59.9 mm29 parts2LNo license0Zazu
AlaaSaadAbdo
304.4 × 135 mm167 parts2LCC-BY-NC-4.0189
How designs wire the DRV2605L
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the DRV2605L connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 2 of 4 designs, most often 1 µF (then 10 µF).
- Pin 8 is tied to GND on 2 of 3 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 75% · a signal 25% |
|
| Pin 8 | Connected to: GND 67% · a signal 33% | — |
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Barghoot by AlaaSaadAbdo, Hivemind by agenticaiuw, Arduino-Haptic-Driver-Shield by id-studiolab and DS Special Object by JoelEB.
The DRV2605L in open source designs
The gallery holds 9 open source boards using the DRV2605L from 6 GitHub repositories; a typical one measures about 160 × 75.4 mm and carries around 45 components.
88% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is Untitled by AlaaSaadAbdo.
Parts used alongside the DRV2605L
Microcontrollers on boards using the DRV2605L
What boards using the DRV2605L are built for
DRV2605L: common questions
Where can I find a DRV2605L reference design?
Each of the 9 boards on this page is a real design using the DRV2605L. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the DRV2605L VDD pin?
The VDD pin has a decoupling capacitor on 2 of 4 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the DRV2605L.
How is the DRV2605L pin 8 connected?
Pin 8 is tied to GND on 2 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the DRV2605L.
Which microcontrollers do boards using the DRV2605L use?
Most are built on AVR/Arduino (1), ESP32 (1) and Nordic nRF (1).
How big is a typical board using the DRV2605L?
The median is 160 × 75.4 mm, and 88% are two-layer designs.
What is the most popular open source board using the DRV2605L?
By GitHub stars, Untitled by AlaaSaadAbdo, with 189 stars.
Can I simulate one of these boards using the DRV2605L before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.