Left device
iid1·roost·sub_feeder/circuit/kicad/left_device.kicad_pcb
About the Left device PCB
Left device is an open source Nordic nRF PCB design by iid1, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 101.5 × 81 mm, with 9 components from 5 distinct parts.
Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 7 switches, 1 IC and 1 connector.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
左手コントローラー(Sub Feeder)の KiCad 設計データ、JLCPCB 発注用 Gerber データです。
Main components on the Left device
Left device bill of materials (BOM)
9 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-nRF52840-SMD | XIAO-nRF52840-SMD | U1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW1 |
| 5 | SW_Push | SW_Kailh_Choc_V1V2_HotSwap_Hybrid | SW2, SW3, SW4, SW5, SW6 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW7 |
Left device design files
The KiCad project lives in the iid1/roost repository on GitHub; these links point at the commit this page was built from.
Left device: common questions
What microcontroller does the Left device use?
The Left device is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.
How big is the Left device PCB?
The Left device measures 101.5 × 81 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Left device?
9 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Left device design files?
From the iid1/roost repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Left device design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which iid1 chose for the repository.
Can I test firmware for the Left device without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in roost
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381