DiodeORLogic
About the DiodeORLogic PCB
DiodeORLogic is an open source PCB design by ijnekenamay, published on GitHub. It is a 2-layer board measuring 92.4 × 91 mm, with 20 components from 13 distinct parts.
By type, the board carries 9 connectors, 9 diodes and 2 resistors.
It belongs with the audio designs in this gallery.
From the project
This is a passive outboard device for modular synths and can be used a "bare"PCB.
- This is a simple circuit mainly for mixing GATE/TRIGGER. - It is 8in and 1out. - P&P file and BOM are included so that you can use SMT assembly with JLCPCB etc. - I use a 3.5mm stereo jack called PJ311. Unnecessary pins for stereo are floated. If you need a large quantity, you can purchase it from Aliexpress under the part number PJ342. - It has actually been manufactured and is working well.
DiodeORLogic bill of materials (BOM)
20 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INPUT1 | Jack_3.5mm_PJ311_Horizontal | J1 |
| 1 | INPUT2 | Jack_3.5mm_PJ311_Horizontal | J2 |
| 1 | INPUT3 | Jack_3.5mm_PJ311_Horizontal | J3 |
| 1 | INPUT4 | Jack_3.5mm_PJ311_Horizontal | J4 |
| 1 | INPUT5 | Jack_3.5mm_PJ311_Horizontal | J5 |
| 1 | INPUT6 | Jack_3.5mm_PJ311_Horizontal | J6 |
| 1 | INPUT7 | Jack_3.5mm_PJ311_Horizontal | J7 |
| 1 | INPUT8 | Jack_3.5mm_PJ311_Horizontal | J8 |
| 1 | OUT | Jack_3.5mm_PJ311_Horizontal | J9 |
| 8 | 1N4148 | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | LED | LED_0805_2012Metric | D10 |
| 1 | 10K 10k | R_0603_1608Metric | R1 |
| 1 | 1k | R_0603_1608Metric | R2 |
DiodeORLogic design files
The KiCad project lives in the ijnekenamay/Passive_modules repository on GitHub; these links point at the commit this page was built from.
DiodeORLogic: common questions
How big is the DiodeORLogic PCB?
The DiodeORLogic measures 92.4 × 91 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DiodeORLogic?
20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DiodeORLogic design files?
From the ijnekenamay/Passive_modules repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the DiodeORLogic design in my own project?
The repository has no license, so all rights stay with ijnekenamay. Use it as a reference, and ask the author before reusing the design.
More boards in Passive_modules
Similar boards
OtterCastAudioV2
Ottercast
50 × 49.3 mm216 parts4LMIT665
FunBox
GuitarML
59.7 × 67.5 mm63 parts2LMIT278
Eurorack pmod
apfaudio
35 × 110 mm116 parts4LCERN-OHL-S-2.0239
XassetteAsterisk
SdtElectronics
56 × 56 mm137 parts2LCERN-OHL-W-2.0229
AddOnC
freeDSP
380 × 45 mm97 parts2LCC-BY-SA-4.0222
AddOnA
178 × 39 mm55 parts2LCC-BY-SA-4.0222