HardLabs

Arduino Shield

IllinoisRoboticsInSpace·IRIS_PCB·boards/Arduino Shield V2 REAL/Arduino Shield.kicad_pcb

Arduino Shield layout, top view — open source AVR/Arduino board by IllinoisRoboticsInSpace
Simulate this board

About the Arduino Shield

Arduino Shield is an open source AVR/Arduino PCB design by IllinoisRoboticsInSpace, published on GitHub. It is a 2-layer board measuring 115 × 75 mm, with 21 components from 8 distinct parts.

Its main chip is the A000062, from the AVR/Arduino family. By type, the board carries 10 connectors, 5 diodes, 5 resistors and 1 IC.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Illinios Robotics in Space PCB

Main components on the Arduino Shield

A000062

Arduino Shield bill of materials (BOM)

21 components, 8 distinct parts.

QtyPartRefs
1
A000062
U1
2
Screw_Terminal_01x07
J1, J8
5
Screw_Terminal_01x08
J2, J3, J5, J6, J7
2
Screw_Terminal_01x08
J4, J11
1
Screw_Terminal_01x10
J9
5
LED
D1, D2, D3, D4, D5
4
6Ω
R1, R2, R3, R5
1
232Ω
R4

Arduino Shield design files

The KiCad project lives in the IllinoisRoboticsInSpace/IRIS_PCB repository on GitHub; these links point at the commit this page was built from.

Arduino Shield: common questions

What microcontroller does the Arduino Shield use?

The Arduino Shield is built around the A000062, from the AVR/Arduino family.

How big is the Arduino Shield?

The Arduino Shield measures 115 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino Shield?

21 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino Shield design files?

From the IllinoisRoboticsInSpace/IRIS_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Arduino Shield design in my own project?

The repository has no license, so all rights stay with IllinoisRoboticsInSpace. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arduino Shield without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in IRIS_PCB

Similar boards