PCBPCBNEW
About the PCBPCBNEW PCB
PCBPCBNEW is an open source PCB design by IllinoisRoboticsInSpace, published on GitHub. It is a 4-layer board measuring 56.3 × 85.6 mm, with 74 components from 18 distinct parts.
Other key parts include the SIC431AED-T1-GE3. By type, the board carries 39 capacitors, 24 resistors, 3 ICs, 3 fuses, 3 inductors and 2 connectors.
It belongs with the robotics & motion designs in this gallery.
From the project
Illinios Robotics in Space PCB
Main components on the PCBPCBNEW
PCBPCBNEW bill of materials (BOM)
74 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | SIC431AED-T1-GE3 | REGULATOR_SIC431AED-T1-GE3 | U1, U2, U3 |
| 1 | Screw_Terminal_01x02 | TE_1986660-2 | J1 |
| 1 | Screw_Terminal_01x06 | 691137710006 | J4 |
| 3 | 0685P9200-01 | FUSC3215X83N | F1, F2, F3 |
| 3 | 1.2uH | L_Vishay_IHLP-5050 | L1, L2, L3 |
| 3 | 150uF | CP_Radial_D12.5mm_P5.00mm | C1, C2, C3 |
| 9 | 100nF | C_0805_2012Metric | C4, C5, C6, C13, C14, C15, C16, C17 +1 |
| 3 | 1uF | C_0805_2012Metric | C7, C8, C9 |
| 3 | 4.7uF | C_0805_2012Metric | C10, C11, C12 |
| 21 | 47uF | C_0805_2012Metric | C19, C20, C21, C22, C23, C24, C25, C26 +13 |
| 3 | 562k | R_0805_2012Metric | R1, R3, R5 |
| 3 | 309k | R_0805_2012Metric | R2, R4, R6 |
| 6 | 100k | R_0805_2012Metric | R7, R8, R9, R10, R11, R12 |
| 3 | 200k | R_0805_2012Metric | R13, R14, R15 |
| 3 | 3.3 | R_0805_2012Metric | R16, R17, R18 |
| 3 | 10k | R_0805_2012Metric | R19, R20, R21 |
| 2 | 73.2 | R_0805_2012Metric | R22, R23 |
| 1 | 73.2k | R_0805_2012Metric | R24 |
PCBPCBNEW design files
The KiCad project lives in the IllinoisRoboticsInSpace/IRIS_PCB repository on GitHub; these links point at the commit this page was built from.
PCBPCBNEW: common questions
How big is the PCBPCBNEW PCB?
The PCBPCBNEW measures 56.3 × 85.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PCBPCBNEW?
74 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCBPCBNEW design files?
From the IllinoisRoboticsInSpace/IRIS_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCBPCBNEW design in my own project?
The repository has no license, so all rights stay with IllinoisRoboticsInSpace. Use it as a reference, and ask the author before reusing the design.
More boards in IRIS_PCB
Power Distribution Board Ver.2
127 × 127 mm89 parts4LNo license2
SIC431
127 × 127 mm89 parts2LNo license2
Sabertoothv2
50 × 50 mm33 parts2LNo license2
Bms
36 × 32.7 mm27 parts2LNo license2
AVR/ArduinoArduino Shield
115 × 75 mm21 parts2LNo license2
12V Power System
215 × 85 mm19 parts2LNo license2
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979