Break-System-Plausibility-Device
imamunorzrashid·Break-System-Plausibility-Device
About the Break-System-Plausibility-Device PCB
Break-System-Plausibility-Device is an open source PCB design by imamunorzrashid, published on GitHub. It is a 2-layer board measuring 115.5 × 94.5 mm, with 29 components from 13 distinct parts.
Other key parts include the LM358, 4075, LM555xN and SN74LS08N. By type, the board carries 7 connectors, 6 ICs, 4 diodes, 4 resistors, 1 transistor and 1 capacitor.
From the project
A standalone, analog Brake System Plausibility Device (BSPD) designed for Formula Student / Formula SAE Electric Vehicles. This project implements the mandatory BSPD safety system using analog comparators, logic gates, and timing circuits without relying on programmable controlle
A standalone, analog Brake System Plausibility Device (BSPD) designed for Formula Student / Formula SAE Electric Vehicles. This project implements the mandatory BSPD safety system using analog comparators, logic gates, and timing circuits without relying on programmable controllers.
The BSPD continuously monitors the brake pressure sensor and tractive system current sensor. If hard braking occurs while the vehicle is delivering significant propulsion power, or if either sensor fails, the BSPD opens the Shutdown Circuit (SDC), disabling the tractive system.
Main components on the Break-System-Plausibility-Device
Break-System-Plausibility-Device bill of materials (BOM)
29 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LM358 | DIP-8_W7.62mm | U1, U2, U6 |
| 1 | 4075 | DIP-14_W7.62mm | U3 |
| 1 | LM555xN | DIP-8_W7.62mm | U4 |
| 1 | SN74LS08N Texas Instruments | DIP-14_W7.62mm | U7 |
| 1 | NPN | TO-92L_Inline_Wide | Q3 |
| 5 | Screw_Terminal_3.5mm_2 | Screw_Terminal_3.5mm-2 | J1, J2, J5, J6, J7 |
| 2 | Screw_Terminal_3.5mm_3 | Screw_Terminal_3.5mm-3 | J3, J4 |
| 2 | 10k | Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 4 | 1k | Potentiometer_Bourns_3296W_Vertical | RV3, RV4, RV5, RV6 |
| 4 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 1 | 10uF | C_Disc_D7.5mm_W2.5mm_P5.00mm | C3 |
| 3 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R21 |
| 1 | 45.5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
Break-System-Plausibility-Device design files
The KiCad project lives in the imamunorzrashid/Break-System-Plausibility-Device repository on GitHub; these links point at the commit this page was built from.
- LayoutBSPD.kicad_pcb
- SchematicBSPD.kicad_sch
Break-System-Plausibility-Device: common questions
How big is the Break-System-Plausibility-Device PCB?
The Break-System-Plausibility-Device measures 115.5 × 94.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Break-System-Plausibility-Device?
29 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Break-System-Plausibility-Device design files?
From the imamunorzrashid/Break-System-Plausibility-Device repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Break-System-Plausibility-Device design in my own project?
The repository has no license, so all rights stay with imamunorzrashid. Use it as a reference, and ask the author before reusing the design.