9 open source boards using the 4075
Real designs built with the 4075, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Pico Interface One
derekfountain
100 × 99.9 mm32 parts4LGPL-2.041Tesla-Coil-MIDI-Synth
ucsbieee
132.1 × 61 mm94 parts4LNo license41802-Mini-Pixie-Video
dmadole
100 × 100 mm49 parts2LGPL-3.02RED 80
assoRED
108.7 × 104.1 mm44 parts4LNo license0Break-System-Plausibility-Device
imamunorzrashid
115.5 × 94.5 mm29 parts2LNo license0X16glasgow
jkominek
78 × 62.3 mm12 parts2LNo license0Logicboard
fsaenz23
150 × 39 mm20 parts4LNo license0New interrupt handler
Trilobyte-CPU
72.7 × 52.6 mm43 parts4LNo license2CLOCK
Trilobyte-CPU
60.5 × 56.4 mm29 parts4LNo license2
How designs wire the 4075
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 4075 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 7 | Connected to: GND 100% | — |
| VDDpin 14 | Connected to: 5V 88% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pico Interface One by derekfountain, Tesla-Coil-MIDI-Synth by ucsbieee, 1802-Mini-Pixie-Video by dmadole and CLOCK by Trilobyte-CPU.
The 4075 in open source designs
The gallery holds 9 open source boards using the 4075 from 8 GitHub repositories; a typical one measures about 100 × 62.3 mm and carries around 32 components.
67% use four copper layers or more, and 22% carry an open source license.
The most starred is Pico Interface One by derekfountain.
Parts used alongside the 4075
Microcontrollers on boards using the 4075
What boards using the 4075 are built for
4075: common questions
Where can I find a 4075 reference design?
Each of the 9 boards on this page is a real design using the 4075. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 4075 VDD pin?
The VDD pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 8 open source designs using the 4075.
Which microcontrollers do boards using the 4075 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the 4075?
The median is 100 × 62.3 mm, and 33% are two-layer designs.
What is the most popular open source board using the 4075?
By GitHub stars, Pico Interface One by derekfountain, with 41 stars.
Can I simulate one of these boards using the 4075 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.