8 open source boards using the SN74LS08N
Real designs built with the SN74LS08N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vectron vga plus v2
nickbild
162.8 × 104.8 mm78 parts2LNo license14Vectron vga plus text mode
nickbild
165.7 × 93.3 mm31 parts2LNo license9Vectron 65 plus
nickbild
131.1 × 79.4 mm48 parts2LNo license54-bit alu
Taliayaya
100 × 100 mm114 parts2LNo license1Clock module
zongr-ce
54.5 × 74.4 mm35 parts2LCC0-1.00Break-System-Plausibility-Device
imamunorzrashid
115.5 × 94.5 mm29 parts2LNo license0Lcr addon
eulerlab
85.1 × 55.1 mm15 parts2LMIT21PCPI AppliCard
baldengineer
271.8 × 78.7 mm76 parts2LCC-BY-4.0442
How designs wire the SN74LS08N
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SN74LS08N connects to, and the resistors, capacitors and other passives placed on it.
- The 4Y pin is left unconnected on 6 of 8 designs (a signal on 2).
- The 2A pin is left unconnected on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 2Apin 4 | Connected to: Not connected 63% · a signal 38% | — |
| GNDpin 7 | Connected to: GND 100% | — |
| 4Ypin 11 | Connected to: Not connected 75% · a signal 25% | — |
| VCCpin 14 | Connected to: 5V 100% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PCPI AppliCard by baldengineer, Lcr addon by eulerlab, Vectron vga plus v2 by nickbild and Vectron vga plus text mode by nickbild.
The SN74LS08N in open source designs
The gallery holds 8 open source boards using the SN74LS08N from 8 GitHub repositories; a typical one measures about 123.3 × 86.4 mm and carries around 42 components.
100% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is PCPI AppliCard by baldengineer.
Parts used alongside the SN74LS08N
What boards using the SN74LS08N are built for
SN74LS08N: common questions
Where can I find a SN74LS08N reference design?
Each of the 8 boards on this page is a real design using the SN74LS08N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74LS08N 4Y pin connected?
The 4Y pin is left unconnected on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the SN74LS08N.
How is the SN74LS08N 2A pin connected?
The 2A pin is left unconnected on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the SN74LS08N.
What parts are used alongside the SN74LS08N?
The SN74LS04N, SN74HC32N, SN74LS682N, LM555xN and SN74LS32N appear in the most repositories here.
How big is a typical board using the SN74LS08N?
The median is 123.3 × 86.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the SN74LS08N?
By GitHub stars, PCPI AppliCard by baldengineer, with 442 stars.
Can I simulate one of these boards using the SN74LS08N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.