Octelehat
imrehg·octelehat
About the Octelehat PCB
Octelehat is an open source PCB design by imrehg, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 29 components from 10 distinct parts.
Other key parts include the MAX31855KASA and ADS1015. By type, the board carries 11 capacitors, 8 resistors, 4 inductors, 3 ICs and 3 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Overclocking Telemetry HAT for Raspberry Pi 3
A Raspberry Pi 3 HAT ("Hardware Attached on Top") specially designed for overclocking.
Temperature measurement Voltage measurement * I2C connectors for expandability
Released under CERN Open Hardware License 1.2, available at http://www.ohwr.org/attachments/2388/cernohlv12.txt
Main components on the Octelehat
Octelehat bill of materials (BOM)
29 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MAX31855KASA | SO-8 | U1, U3 |
| 1 | ADS1015 | TSSOP-10_3x3mm_Pitch0.5mm | U2 |
| 1 | CONN_02X20 | Socket_Strip_Straight_2x20_Pitch2.54mm | P1 |
| 2 | CONN_01X02 | Thermocouple | P2, P3 |
| 4 | FERRITE | L0603 | FB1, FB2, FB3, FB4 |
| 9 | 0.1u | C_0402 | C1, C2, C3, C4, C6, C7, C8, C9 +1 |
| 2 | 0.01u | C_0402 | C5, C11 |
| 4 | SMD-RES-10K-1%-1_10W_0603_ | R0603 | R1, R2, R5, R6 |
| 2 | SMD-RES-100K-1%-1_10W_0603_ | R0603 | R3, R7 |
| 2 | SMD-RES-30K-1%-1_10W_0603_ | R0603 | R4, R8 |
Octelehat design files
The KiCad project lives in the imrehg/octelehat repository on GitHub; these links point at the commit this page was built from.
- Layoutoctelehat.kicad_pcb
Octelehat: common questions
How big is the Octelehat PCB?
The Octelehat measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Octelehat?
29 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Octelehat design files?
From the imrehg/octelehat repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Octelehat design in my own project?
The repository has no license, so all rights stay with imrehg. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979