28 open source boards using the MAX31855KASA
Real designs built with the MAX31855KASA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Temperature logger
Jana-Marie
106 × 50 mm151 parts4LCERN-OHL-S-2.068STM32
Frankenso
rusefi
154.1 × 161.7 mm614 parts2LNo license48Uaefi
rusefi
100 × 100 mm164 parts4LNo license36STM32
SmartReflow
walclu
43 × 89 mm88 parts4LNo license15CTA control board
PySpice-org
252 × 152 mm614 parts4LNo license9PIC
Thermocouple board
waterloo-rocketry
73.9 × 56.6 mm59 parts2LNo license5ESP32
Temp logger
hnz1102
50 × 70 mm52 parts2LNo license5AVR/Arduino
Ultimate temperature controller
Technariumas
80 × 100 mm68 parts2LApache-2.04NXP
SupersonicTestRocket
EPFLRocketTeam
239.5 × 38.7 mm62 parts2LNo license4RP2040/RP2350
LEC
MSTRocketDesignTeam
152.9 × 77.2 mm66 parts4LAGPL-3.02AVR/Arduino
Awreflow3
kelogs
100 × 100 mm49 parts2LMIT2CoolingBoxWireOrganizer
Itaru-Kitano
89.9 × 53.3 mm67 parts2LNo license1Mqtt thermocouple
uw-madison-chem-shops
91.4 × 66 mm33 parts2LCERN-OHL-P-2.01STM32
Frankenso
glocklueng
154.1 × 161.7 mm565 parts2LNo license0Moxl
perryc
65 × 56 mm88 parts6LApache-2.00STM32
Reflow oven
edenbarby
80 × 80 mm83 parts2LNo license0AVR/Arduino
Power board
MST-Robotics
171.8 × 117.7 mm80 parts2LNo license0STM32
Solder Reflow Oven 2.0
1sand0s
64.8 × 61.2 mm46 parts2LMIT0AVR/Arduino
Slice HEAT
feastorg
70 × 100 mm41 parts2LGPL-3.00STM32
USBPDSolderingIron
keionbis
70 × 13.5 mm40 parts2LNo license0AVR/Arduino
Slice RLHT
feastorg
70 × 100 mm36 parts2LGPL-3.00Octelehat
imrehg
65 × 56 mm29 parts2LNo license0STM32
Frankenso
rusefi
147.6 × 102 mm127 parts2LNo license2DAQ module
MSTRocketDesignTeam
38 × 58.5 mm52 parts4LAGPL-3.02Connector board
calstar
134.1 × 141.7 mm37 parts4LCC0-1.01STM32
TC3Controller
joshop
35 × 37.3 mm34 parts2LNo license1STM32
TCPL-STM-CAN
glocklueng
147.6 × 102 mm127 parts2LNo license0STM32
Lambda x2
rusefi
81.9 × 95 mm230 parts4LNo license48
How designs wire the MAX31855KASA
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the MAX31855KASA connects to, and the resistors, capacitors and other passives placed on it.
- The T- pin has a series capacitor on 18 of 24 designs, most often 10 nF (then 100 nF).
- The T+ pin has a series capacitor on 18 of 24 designs, most often 10 nF (then 100 nF).
- The VCC pin has a decoupling capacitor on 18 of 24 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 92% | — |
| T-pin 2 | Connected to: A connector 54% |
|
| T+pin 3 | Connected to: A connector 58% |
|
| VCCpin 4 | Connected to: 3.3V 88% |
|
| CSpin 6 | Connected to: The microcontroller 63%, a connector 33% |
|
| NCpin 8 | Connected to: Not connected 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Temperature logger by Jana-Marie, Frankenso by rusefi, Uaefi by rusefi and SmartReflow by walclu.
The MAX31855KASA in open source designs
The gallery holds 28 open source boards using the MAX31855KASA from 25 GitHub repositories; a typical one measures about 85.9 × 84.5 mm and carries around 67 components.
68% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is Temperature logger by Jana-Marie.
Parts used alongside the MAX31855KASA
Microcontrollers on boards using the MAX31855KASA
What boards using the MAX31855KASA are built for
MAX31855KASA: common questions
Where can I find a MAX31855KASA reference design?
Each of the 28 boards on this page is a real design using the MAX31855KASA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MAX31855KASA T- pin connected?
The T- pin has a series capacitor on 18 of 24 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 24 open source designs using the MAX31855KASA.
How is the MAX31855KASA T+ pin connected?
The T+ pin has a series capacitor on 18 of 24 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 24 open source designs using the MAX31855KASA.
What decoupling capacitors do designs use on the MAX31855KASA VCC pin?
The VCC pin has a decoupling capacitor on 18 of 24 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 24 open source designs using the MAX31855KASA.
What parts are used alongside the MAX31855KASA?
The FT232RL, LM2937, NUF2101MT1G, SN65HVD230 and Arduino_Nano_v3.x appear in the most repositories here.
Which microcontrollers do boards using the MAX31855KASA use?
Most are built on STM32 (11), AVR/Arduino (5), ESP32 (1) and NXP (1).
How big is a typical board using the MAX31855KASA?
The median is 85.9 × 84.5 mm, and 68% are two-layer designs.
What is the most popular open source board using the MAX31855KASA?
By GitHub stars, Temperature logger by Jana-Marie, with 68 stars.
Can I simulate one of these boards using the MAX31855KASA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.