Servo Voltage Stepdown
innate-inc·mars·pcbs/servo-voltage-stepdown/Servo Voltage Stepdown.kicad_pcb
About the Servo Voltage Stepdown PCB
Servo Voltage Stepdown is an open source PCB design by innate-inc, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 19.7 × 28.4 mm, with 10 components from 9 distinct parts.
Other key parts include the TPS5430DDA. By type, the board carries 3 capacitors, 2 connectors, 2 resistors, 1 IC, 1 diode and 1 inductor.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
in progress
KiCad project files and production-ready outputs for all Mars robot circuit boards.
The head PCB controls sensors and actuators in the robot's head assembly.
- KiCad Project: leader.kicadpro - Schematic: leader.kicadsch - PCB Layout: leader.kicad_pcb
Production Files (head-pcb/production/): - Gerbers & Drill Files - BOM (Bill of Materials) - Component Positions - Designators Reference - IPC Netlist
Main components on the Servo Voltage Stepdown
Servo Voltage Stepdown bill of materials (BOM)
10 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5430DDA | TI_SO-PowerPAD-8_ThermalVias | U1 |
| 2 | CONN_01X03 Conn_01x03 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1, J2 |
| 1 | B340A-13-F | DIOM5226X240N | D1 |
| 1 | FXL0630-150-M | INDM7066X300N | L2 |
| 1 | 22UF 22uF | C_0805_2012Metric | C4 |
| 1 | 10NF 10nF | C_0603_1608Metric | C5 |
| 1 | 10TPB220ML | CAP_10TPB220ML | C7 |
| 1 | 10K 10k | R_0603_1608Metric | R5 |
| 1 | 3.24K 3.24k | R_0603_1608Metric | R6 |
Servo Voltage Stepdown design files
The KiCad project lives in the innate-inc/mars repository on GitHub; these links point at the commit this page was built from.
Servo Voltage Stepdown: common questions
How big is the Servo Voltage Stepdown PCB?
The Servo Voltage Stepdown measures 19.7 × 28.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Servo Voltage Stepdown?
10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Servo Voltage Stepdown design files?
From the innate-inc/mars repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Servo Voltage Stepdown design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which innate-inc chose for the repository.
More boards in mars
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k