Intv audio line driver

intelliputer·audio-composites·project/intv-audio-line-driver.kicad_pcb

Intv audio line driver PCB layout, top view — open source board by intelliputer

About the Intv audio line driver PCB

Intv audio line driver is an open source PCB design by intelliputer, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 94 × 67 mm, with 20 components from 14 distinct parts.

By type, the board carries 9 resistors, 5 capacitors, 4 connectors and 2 transistors.

It belongs with the audio designs in this gallery.

From the project

Since just seeing isn't believing

This repository now contains a standalone audio-output prototype for the NTSC Intellivision I, Intellivision II, and Sears 497.75022. It taps the console's pre-RF mono audio, buffers it with a two-transistor gain/line-driver stage, and returns a buffered mono line to the video-composite board's audio-output connection. It does not create stereo or alter the console's sound generation.

Intv audio line driver bill of materials (BOM)

20 components, 14 distinct parts.

QtyPartRefs
2
2N3904
Q1, Q2
1
RAW AUD IN
J1
1
BUF AUD OUT
J2
1
+5V FROM VID
J3
1
GND FROM VID
J4
2
10u
C1, C2
2
100u
C3, C4
1
100n
C5
1
68k
R1
1
22k
R2
1
4.7k
R3
3
1k
R4, R8, R9
2
33k
R5, R6
1
0R
R7

Intv audio line driver design files

The KiCad project lives in the intelliputer/audio-composites repository on GitHub; these links point at the commit this page was built from.

Intv audio line driver: common questions

How big is the Intv audio line driver PCB?

The Intv audio line driver measures 94 × 67 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Intv audio line driver?

20 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Intv audio line driver design files?

From the intelliputer/audio-composites repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Intv audio line driver design in my own project?

Yes, under the terms of its GPL-3.0 license, which intelliputer chose for the repository.

More boards in audio-composites

Similar boards