Intv audio line driver rev b

intelliputer·audio-composites·project/intv-audio-line-driver-rev-b.kicad_pcb

Intv audio line driver rev b PCB layout, top view — open source board by intelliputer

About the Intv audio line driver rev b PCB

Intv audio line driver rev b is an open source PCB design by intelliputer, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 70 × 50 mm, with 17 components from 13 distinct parts.

Other key parts include the KA358. By type, the board carries 7 resistors, 5 capacitors, 4 connectors and 1 IC.

It belongs with the audio designs in this gallery.

From the project

Since just seeing isn't believing

This repository now contains a standalone audio-output prototype for the NTSC Intellivision I, Intellivision II, and Sears 497.75022. It taps the console's pre-RF mono audio, buffers it with a two-transistor gain/line-driver stage, and returns a buffered mono line to the video-composite board's audio-output connection. It does not create stereo or alter the console's sound generation.

Main components on the Intv audio line driver rev b

KA358

Intv audio line driver rev b bill of materials (BOM)

17 components, 13 distinct parts.

QtyPartRefs
1
KA358
U1
1
RAW AUDIO IN
J1
1
BUFFERED AUDIO OUT
J2
1
+5V FROM VIDEO
J3
1
GND FROM VIDEO
J4
1
1u
C1
2
47u
C2, C3
1
10u
C4
1
100n
C5
1
10R
R1
4
10k
R2, R3, R5, R6
1
100k
R4
1
1k
R7

Intv audio line driver rev b design files

The KiCad project lives in the intelliputer/audio-composites repository on GitHub; these links point at the commit this page was built from.

Intv audio line driver rev b: common questions

How big is the Intv audio line driver rev b PCB?

The Intv audio line driver rev b measures 70 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Intv audio line driver rev b?

17 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Intv audio line driver rev b design files?

From the intelliputer/audio-composites repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Intv audio line driver rev b design in my own project?

Yes, under the terms of its GPL-3.0 license, which intelliputer chose for the repository.

More boards in audio-composites

Similar boards