Modular AD74416H PLC
About the Modular AD74416H PLC PCB
Modular AD74416H PLC is an open source PCB design by ionutms, published on GitHub under the MIT license. It is a 2-layer board measuring 45.8 × 2.5 mm, with 22 components from 10 distinct parts.
It belongs with the sensors designs in this gallery.
From the project
This repository contains a modular KiCad design project for a PLC based on the Analog Devices AD74416H, a quad-channel, software-configurable input and output device with HART modem capabilities. The project includes schematic designs and PCB layout files for implementing this ve
This repository contains a modular KiCad design project for a PLC based on the Analog Devices AD74416H, a quad-channel, software-configurable input and output device with HART modem capabilities. The project includes schematic designs and PCB layout files for implementing this versatile analog I/O device in a modular fashion, with a separate power interface module.
Modular AD74416H PLC bill of materials (BOM)
22 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | ~ | minimal_ad74416h | A1, A2, A3, A4 |
| 1 | ~ | ad74416h_power_interface_module_v2 | A5 |
| 1 | ~ | minimal_ad74416h_stack_adapter_v2 | A6 |
| 1 | ~ | minimal_adpl76030_v2 | A7 |
| 1 | ~ | minimal_adp1074_v2 | A8 |
| 2 | ~ | 2203350 | M1, M10 |
| 4 | ~ | 2203404_v2 | M2, M3, M4, M5 |
| 4 | ~ | 2203400 | M6, M7, M8, M9 |
| 2 | ~ | 2203362_v2 | M11, M12 |
| 2 | ~ | 2203369_v2 | M13, M14 |
Modular AD74416H PLC design files
The KiCad project lives in the ionutms/Modular_AD74416H_PLC repository on GitHub; these links point at the commit this page was built from.
Modular AD74416H PLC: common questions
How big is the Modular AD74416H PLC PCB?
The Modular AD74416H PLC measures 45.8 × 2.5 mm, has 2 copper layers and is 1.092 mm thick.
How many components are on the Modular AD74416H PLC?
22 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Modular AD74416H PLC design files?
From the ionutms/Modular_AD74416H_PLC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Modular AD74416H PLC design in my own project?
Yes, under the terms of its MIT license, which ionutms chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956