ESP32-Super-Mini-LED-Controller
irampton·LED_PCBs_V2·esp32-super-mini-led-controller/build/ESP32-Super-Mini-LED-Controller.kicad_pcb
About the ESP32-Super-Mini-LED-Controller PCB
ESP32-Super-Mini-LED-Controller is an open source ESP32 PCB design by irampton, published on GitHub under the MIT license. It is a 2-layer board measuring 53 × 30 mm, with 4 components from 2 distinct parts.
Its main chip is the ESP32-C3 SuperMini, from the ESP32 family.
ESP32-Super-Mini-LED-Controller bill of materials (BOM)
4 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3 SuperMini | ESP32_C3_SUPERMINI | ESP32 |
| 3 | PZ2.54-2X5P-H25 JXTCONN(聚兴泰) | PZ2_54_2X5P_H25 | H1, H2, H3 |
ESP32-Super-Mini-LED-Controller design files
The KiCad project lives in the irampton/LED_PCBs_V2 repository on GitHub; these links point at the commit this page was built from.
ESP32-Super-Mini-LED-Controller: common questions
What microcontroller does the ESP32-Super-Mini-LED-Controller use?
The ESP32-Super-Mini-LED-Controller is built around the ESP32-C3 SuperMini, from the ESP32 family.
How big is the ESP32-Super-Mini-LED-Controller PCB?
The ESP32-Super-Mini-LED-Controller measures 53 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Super-Mini-LED-Controller?
4 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-Super-Mini-LED-Controller design files?
From the irampton/LED_PCBs_V2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-Super-Mini-LED-Controller design in my own project?
Yes, under the terms of its MIT license, which irampton chose for the repository.
Can I test firmware for the ESP32-Super-Mini-LED-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in LED_PCBs_V2
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k