4mb mapper
iricryst·4mb-mapper·KICAD/4mb mapper nms8280.kicad_pcb
About the 4mb mapper PCB
4mb mapper is an open source PCB design by iricryst, published on GitHub. It is a 2-layer board measuring 102.2 × 68.2 mm, with 28 components from 11 distinct parts.
Other key parts include the 74LS125, 74LS157, 74LS670, 74LS08 and 74LS00. By type, the board carries 11 ICs, 11 capacitors and 1 connector.
From the project
In here you will find my PCB design, based on the original design by Hans Oranje. See reference documents below.
In here you will find my PCB design, based on the original design by Hans Oranje. See reference documents below.
My goal was to create a PCB to get rid of most of the wiring described in the original paper.
Why design yet another PCB, while there are so many other solutions?
- This design replaces the stock memory, so it doesn't occupy a (expanded) slot. It just keeps the memory at slot 3.2 - No piggybacking IC's on the original IC's. The piggybacking still occurs, but neatly on the PCB - No gazzilion wires, creating spaghetti - Reverting back to stock should be easy - Profile kept as low…

Main components on the 4mb mapper
4mb mapper bill of materials (BOM)
28 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74LS125 | SOIC-14_3.9x8.7mm_P1.27mm | IC131, IC131B1, IC131C1 |
| 2 | 74LS157 | SOIC-16_3.9x9.9mm_P1.27mm | IC147, IC147B1 |
| 2 | 74LS670 | SOIC-16_3.9x9.9mm_P1.27mm | IC149, IC149B1 |
| 1 | 74LS08 | SOIC-14_3.9x8.7mm_P1.27mm | IC157B1 |
| 1 | 74LS00 | SOIC-14_3.9x8.7mm_P1.27mm | IC180B1 |
| 2 | HY5117404B | SOJ-2624_7.62x18.415mm_P1.27mm | U1, U2 |
| 1 | Conn_01x10_Pin | PinHeader_1x10_P1.27mm_Horizontal | J1 |
| 1 | Pin Header 2x7 2,54mm Rounded | PinHeader_2x07_P2.54mm_Vertical | CONN131 |
| 2 | Pin Header 2x9 2,54mm Rounded | PinHeader_2x09_P2.54mm_Vertical | CONN133, CONN134 |
| 2 | Pin Header 2x8 2,54mm Rounded | PinHeader_2x08_P2.54mm_Vertical | CONN147, CONN149 |
| 11 | 100nf | C_0805_2012Metric | C1, C2, C131, C131B1, C131B2, C147, C147B1, C149 +3 |
4mb mapper design files
The KiCad project lives in the iricryst/4mb-mapper repository on GitHub; these links point at the commit this page was built from.
4mb mapper: common questions
How big is the 4mb mapper PCB?
The 4mb mapper measures 102.2 × 68.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 4mb mapper?
28 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the 4mb mapper design files?
From the iricryst/4mb-mapper repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 4mb mapper design in my own project?
The repository has no license, so all rights stay with iricryst. Use it as a reference, and ask the author before reusing the design.