235 open source boards using the 74LS00
Real designs built with the 74LS00, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Instruction
jes
237.5 × 102.9 mm110 parts2LUnlicense301SCOPETREX
schlae
177.8 × 127 mm197 parts2LNo license245Raspberry Pi
Apple2-IO-RPi
tjboldt
89.5 × 77.5 mm24 parts2LMIT13868000
jefftranter
134.6 × 208.3 mm90 parts2LNo license132Sch
DownUnderCTF
150 × 110 mm47 parts4LNo license115AVR/Arduino
TTY
KALTCHUK
99.7 × 69.9 mm43 parts2LNo license94Vic2020mainboard
danwerner21
357.8 × 124.5 mm127 parts2LNo license78ProDOS-ROM-Drive
tjboldt
85.7 × 54 mm17 parts2LMIT77CGA Redux
hkzlab
337.6 × 105.7 mm168 parts4LCC-BY-NC-4.056TI99 22
danwerner21
350 × 224.3 mm242 parts2LNo license5080ColumnCard
btb
155.2 × 78.6 mm47 parts2LApache-2.042Zx2022
michalin
100 × 100 mm34 parts2LGPL-3.041St251n 20603
schlae
137.4 × 199.1 mm277 parts4LNo license38HEC-Model-Z1
Andy18650
243.8 × 170.2 mm113 parts4LGPL-3.036Tandy1000ex hx ram
misterblack1
57.2 × 84.5 mm17 parts2LNo license36Dragon64
danwerner21
333.2 × 205.9 mm220 parts2LNo license34Retroii
jonthomasson
330.2 × 215.9 mm295 parts4LNo license33Sg1000
barbeque
162.2 × 134.6 mm71 parts2LCC-BY-NC-4.033IBMExtender
schlae
203.2 × 105.4 mm43 parts4LNo license32Ttl clock
skiselev
100 × 100 mm60 parts2LGPL-3.028Apple-II-R0
reifsnyderb
215.5 × 361.2 mm189 parts2LNo license26C128-mmu-256k exp
ytmytm
48.3 × 90.2 mm12 parts2LMIT26RC1 UI
tebl
99.1 × 97.2 mm89 parts2LCERN-OHL-1.225Plusd
alvaroalea
99.1 × 99.1 mm58 parts2LNo license24- schematic only · 32 parts
Digicard-D-Net
markadev
32 parts2LNo license23 ZX-Spectrum-Issue-4B
iansbremner
213.4 × 130.8 mm199 parts2LNo license226809v2
jbevren
99.1 × 99.1 mm52 parts2LNo license22- schematic only · 89 parts
Proton Turbo XT
skiselev
89 partsNo license22 Fennec6800
ChartreuseK
218 × 131.9 mm113 parts2LBSD-3-Clause20ALU1 - 副本
Left-Hand
99.7 × 99.7 mm73 parts2LNo license19Odyssey 2 rgb
abzman
83.3 × 78.2 mm70 parts2LUnlicense19MyCpu
fortinsylvain
194.5 × 188.6 mm156 parts4LMIT18- schematic only · 124 parts
Arcade-IremM92 MiSTer
MiSTer-devel
124 partsGPL-2.017 Coleco original
sparkletron
168.4 × 214 mm218 parts2LMIT16TurboXT Addon
hkzlab
74.3 × 43.8 mm28 parts2LCC-BY-NC-4.015Junior interface
laurent-fr
217.2 × 113 mm116 parts2LCC-BY-NC-4.014
How designs wire the 74LS00
Read from the KiCad layouts of 152 open source designs, one per repository: what each pin of the 74LS00 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 73 of 152 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 95% | — |
| VCCpin 14 | Connected to: 5V 92% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Instruction by jes, SCOPETREX by schlae, RC6502 RAM by tebl and Apple2-IO-RPi by tjboldt.
The 74LS00 in open source designs
The gallery holds 235 open source boards using the 74LS00 from 162 GitHub repositories; a typical one measures about 142 × 100 mm and carries around 53 components.
84% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Instruction by jes.
Parts used alongside the 74LS00
Microcontrollers on boards using the 74LS00
What boards using the 74LS00 are built for
74LS00: common questions
Where can I find a 74LS00 reference design?
Each of the 235 boards on this page is a real design using the 74LS00. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS00 VCC pin?
The VCC pin has a decoupling capacitor on 73 of 152 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 152 open source designs using the 74LS00.
What parts are used alongside the 74LS00?
The 74LS04, 74LS32, 74LS245, 74LS08 and 74LS138 appear in the most repositories here.
Which microcontrollers do boards using the 74LS00 use?
Most are built on AVR/Arduino (15), RP2040/RP2350 (1), PIC (1) and Raspberry Pi (1).
How big is a typical board using the 74LS00?
The median is 142 × 100 mm, and 84% are two-layer designs.
What is the most popular open source board using the 74LS00?
By GitHub stars, Instruction by jes, with 301 stars.
Can I simulate one of these boards using the 74LS00 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.