15 open source boards using the 74LS670
Real designs built with the 74LS670, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zeta sbc
skiselev
170.2 × 100 mm74 partsGPL-3.051ESP8266
Deck65
and3rson
254 × 80 mm183 parts2LGPL-3.015AVG Discrete
nmikstas
121.9 × 91.4 mm36 parts2LNo license14ISA EMS
hightower70
104.1 × 102.9 mm26 parts2LApache-2.02Z80-MegaMapper
tergav17
158.8 × 91.4 mm42 parts2LNo license18088-MicroATX-Computer
CPTforever
244 × 244 mm184 parts6LNo license0Motherboard
MicroLind-Developers
170.2 × 170.2 mm120 parts4LCERN-OHL-P-2.004mb mapper
iricryst
102.2 × 68.2 mm28 parts2LNo license04mb mapper nms8280
iricryst
102.2 × 68.2 mm28 parts2LNo license0- schematic only · 164 parts
Xl-7-repro
computerguy096
164 partsGPL-3.00 - schematic only · 31 parts
Pravetz-16
enaix
31 partsNo license0 AVG Discrete
Mazamars312
121.9 × 91.4 mm36 parts2LNo license6RC2014-512K-RAMROM-V2
dennisperry
104 × 46 mm16 parts2LNo license0DMA
homebrew8088
132 × 73.9 mm13 parts2LGPL-3.0238Reg4x16
AJain9199
35 × 60 mm22 parts2LNo license1
How designs wire the 74LS670
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the 74LS670 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 13 of 13 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: 5V 92% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DMA by homebrew8088, Zeta sbc by skiselev, Deck65 by and3rson and AVG Discrete KiCad by nmikstas.
The 74LS670 in open source designs
The gallery holds 15 open source boards using the 74LS670 from 15 GitHub repositories; a typical one measures about 121.9 × 91.4 mm and carries around 36 components.
83% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is DMA by homebrew8088.
Parts used alongside the 74LS670
Microcontrollers on boards using the 74LS670
What boards using the 74LS670 are built for
74LS670: common questions
Where can I find a 74LS670 reference design?
Each of the 15 boards on this page is a real design using the 74LS670. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS670 VCC pin?
The VCC pin has a decoupling capacitor on 13 of 13 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the 74LS670.
What parts are used alongside the 74LS670?
The 74LS244, 74LS74, 74LS04, 74LS245 and 74LS00 appear in the most repositories here.
Which microcontrollers do boards using the 74LS670 use?
Most are built on ESP8266 (1).
How big is a typical board using the 74LS670?
The median is 121.9 × 91.4 mm, and 83% are two-layer designs.
What is the most popular open source board using the 74LS670?
By GitHub stars, DMA by homebrew8088, with 238 stars.
Can I simulate one of these boards using the 74LS670 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.