Pic32devbrd
irwineffect·pic32devbrd·RevB/pic32brd.kicad_pcb
About the Pic32devbrd PCB
Pic32devbrd is an open source PIC PCB design by irwineffect, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 21.6 × 40 mm, with 33 components from 21 distinct parts.
Its main chip is the PIC32MX2xx/1xx, from the PIC family. Other key parts include the FT230X and LM3671. By type, the board carries 11 capacitors, 9 resistors, 4 connectors, 4 diodes, 3 ICs and 1 fuse.
From the project
A general purpose development board for the PIC32MX250F128B microcontroller. Please see the [wiki] (https://github.com/irwineffect/pic32devbrd/wiki) for more information.
A general purpose development board for the PIC32MX250F128B microcontroller. Please see the [wiki] (https://github.com/irwineffect/pic32devbrd/wiki) for more information.
Also, you should check out the SUBLIBinal library, an efficient interrupt-driven library designed for boards using this microcontroller.
Main components on the Pic32devbrd
Pic32devbrd bill of materials (BOM)
33 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT230X | SSOP-16_3.9x4.9mm_Pitch0.635mm | IC1 |
| 1 | PIC32MX2xx/1xx | SSOP-28_5.3x10.2mm_Pitch0.65mm | IC2 |
| 1 | LM3671 | SOT-23-5 | IC3 |
| 1 | prog_header | Pin_Header_Staggered_1x06 | Con1 |
| 1 | USB_OTG | USB-MICRO-B | P1 |
| 2 | CONN_01X09 | Pin_Header_Straight_1x09 | P2, P3 |
| 1 | PTC Fuse | C_0805_HandSoldering | F1 |
| 1 | TX | LED_0805 | D1 |
| 1 | RX | LED_0805 | D2 |
| 1 | PWR | LED_0805 | D3 |
| 1 | RB5 | LED_0805 | D4 |
| 1 | 2.2u | C_0805_HandSoldering | L1 |
| 5 | 100n | C_0805_HandSoldering | C1, C3, C8, C9, C10 |
| 2 | 4.7u | C_0805_HandSoldering | C2, C6 |
| 2 | 10u | C_0805_HandSoldering | C4, C7 |
| 2 | 47p | C_0805_HandSoldering | C5, C11 |
| 4 | 270 | R_0805_HandSoldering | R1, R2, R6, R7 |
| 1 | 10k | R_0805_HandSoldering | R3 |
| 1 | 1k | R_0805_HandSoldering | R4 |
| 1 | 10 | R_0805_HandSoldering | R5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 27 | R_0805_HandSoldering | R8, R9 |
Pic32devbrd design files
The KiCad project lives in the irwineffect/pic32devbrd repository on GitHub; these links point at the commit this page was built from.
Pic32devbrd: common questions
What microcontroller does the Pic32devbrd use?
The Pic32devbrd is built around the PIC32MX2xx/1xx, from the PIC family.
How big is the Pic32devbrd PCB?
The Pic32devbrd measures 21.6 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pic32devbrd?
33 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pic32devbrd design files?
From the irwineffect/pic32devbrd repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Pic32devbrd design in my own project?
Yes, under the terms of its GPL-3.0 license, which irwineffect chose for the repository.
Can I test firmware for the Pic32devbrd without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379