14 open source boards using the FT230X
Real designs built with the FT230X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
GPS Mezzanine
96boards
85 × 54 mm32 parts2LNo license32PIC
Curve tracer hardware
slightlynybbled
60 × 37 mm60 parts2LMIT25PIC
Keithley 199 Digital board
asanza
85 × 60 mm74 parts4LGPL-3.0896boards robomezzi
mwelling
85 × 54 mm112 parts4LCC-BY-SA-4.06AVR/Arduino
FlashProgrammer
jdisanti
61 × 38.1 mm47 parts2LApache-2.02- schematic only · 99 partsAVR/Arduino
Bill-Of-Materials-Tools
Jesse-Millwood
99 partsNo license1 AVR/Arduino
Rfpirate
s3c
56.1 × 93 mm137 parts4LNo license0PIC
Keithley 199 Digital board
Na55im
90 × 65 mm79 parts4LGPL-3.00PIC
Pic32devbrd
irwineffect
21.6 × 40 mm33 parts2LGPL-3.00PIC
Calc
pparent76
50 × 50 mm118 parts6LNo license2PIC
Frontpanel
Na55im
132.5 × 20.5 mm28 parts2LGPL-3.00PIC
BodyController 01
Voltworks-Garage
155 × 106 mm398 parts4LGPL-3.00L0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547
How designs wire the FT230X
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the FT230X connects to, and the resistors, capacitors and other passives placed on it.
- Pin 8 has a series resistor on 9 of 11 designs, most often 27 Ω (then 4.7 kΩ).
- Pin 9 has a series resistor on 9 of 11 designs, most often 27 Ω (then 4.7 kΩ).
- Pin 10 has a capacitor to GND on 9 of 11 designs, most often 100 nF (then 1 µF).
- Pin 13 is tied to GND on 10 of 10 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: Not connected 64% · a signal 36% | — |
| Pin 3 | Connected to: Signal 45% · GND 18% · 3.3V 27% |
|
| Pin 5 | Connected to: GND 73% · not connected 18% | — |
| Pin 6 | Connected to: Not connected 73% · a signal 27% | — |
| Pin 7 | Connected to: Signal 73% · not connected 27% |
|
| Pin 8 | Connected to: Signal 91% |
|
| Pin 9 | Connected to: Signal 100% |
|
| Pin 10 | Connected to: Signal 64% · 3.3V 27% |
|
| Pin 11 | Connected to: Signal 55% · not connected 18% · 3.3V 27% |
|
| Pin 12 | Connected to: 5V 45% · not connected 18% · a signal 36% |
|
| Pin 13 | Connected to: GND 100% | — |
| Pin 14 | Connected to: Not connected 50% · a signal 50% |
|
| Pin 16 | Connected to: Not connected 70% · a signal 30% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include L0 USB by Luos-io, GPS Mezzanine by 96boards, Curve tracer hardware by slightlynybbled and Keithley 199 Digital board by asanza.
The FT230X in open source designs
The gallery holds 14 open source boards using the FT230X from 12 GitHub repositories; a typical one measures about 61 × 50 mm and carries around 67 components.
54% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is L0 USB by Luos-io.
Parts used alongside the FT230X
Microcontrollers on boards using the FT230X
What boards using the FT230X are built for
FT230X: common questions
Where can I find a FT230X reference design?
Each of the 14 boards on this page is a real design using the FT230X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the FT230X pin 8?
Pin 8 has a series resistor on 9 of 11 designs, most often 27 Ω (then 4.7 kΩ). Counted from the KiCad layouts of 11 open source designs using the FT230X.
What resistor goes on the FT230X pin 9?
Pin 9 has a series resistor on 9 of 11 designs, most often 27 Ω (then 4.7 kΩ). Counted from the KiCad layouts of 11 open source designs using the FT230X.
How is the FT230X pin 10 connected?
Pin 10 has a capacitor to GND on 9 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the FT230X.
What parts are used alongside the FT230X?
The 24AA256, 4050, ADS1015, LM2936 and MCP1700T-1802E appear in the most repositories here.
Which microcontrollers do boards using the FT230X use?
Most are built on PIC (7) and AVR/Arduino (3).
How big is a typical board using the FT230X?
The median is 61 × 50 mm, and 54% are two-layer designs.
What is the most popular open source board using the FT230X?
By GitHub stars, L0 USB by Luos-io, with 547 stars.
Can I simulate one of these boards using the FT230X before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.