Mai pico nano touch
Isoheptane·mai-pico-nano·mai-pico-nano-touch-halfhole/mai-pico-nano-touch.kicad_pcb
About the Mai pico nano touch PCB
Mai pico nano touch is an open source RP2040/RP2350 PCB design by Isoheptane, published on GitHub under the MIT license. It is a 2-layer board measuring 99 × 18 mm, with 5 components from 5 distinct parts.
Its main chip is the RP2040-ZERO, from the RP2040/RP2350 family. Other key parts include the SN74LV1T34DBV and ME6211C33M5. By type, the board carries 3 ICs and 2 connectors.
From the project
Optimized mai-pico PCBs
Main components on the Mai pico nano touch
Mai pico nano touch bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040-ZERO MPR121-Module | MPR121-Module | U1 |
| 1 | SN74LV1T34DBV MPR121-Module | MPR121-Module | U2 |
| 1 | ME6211C33M5 MPR121-Module | MPR121-Module | U3 |
| 1 | CONN_01X03 Conn_01x04 | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J1 |
| 1 | CONN_01X04 Conn_01x34 | TouchSensors | J2 |
Mai pico nano touch design files
The KiCad project lives in the Isoheptane/mai-pico-nano repository on GitHub; these links point at the commit this page was built from.
Mai pico nano touch: common questions
What microcontroller does the Mai pico nano touch use?
The Mai pico nano touch is built around the RP2040-ZERO, from the RP2040/RP2350 family.
How big is the Mai pico nano touch PCB?
The Mai pico nano touch measures 99 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mai pico nano touch?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mai pico nano touch design files?
From the Isoheptane/mai-pico-nano repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mai pico nano touch design in my own project?
Yes, under the terms of its MIT license, which Isoheptane chose for the repository.
Can I test firmware for the Mai pico nano touch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in mai-pico-nano
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k