48 open source boards using the ME6211C33M5
Real designs built with the ME6211C33M5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Bluetooth minidisc
17o2
72.4 × 44.5 mm71 parts4LNo license44ESP32
Oniondao badge
OnionDAO-git
76.6 × 141.1 mm116 parts2LNo license17RP2040/RP2350
Expansion board v4
naizhao
100 × 62 mm213 parts6LMIT11STM32
Longboi
KungfuPancake
358 × 40 mm285 parts4LApache-2.07ESP32
EL6170 Pro Max Plus
jsjsjsjsjsjsjson
128 × 70.5 mm159 parts2LNo license7RP2040/RP2350
Mai pico nano io
Isoheptane
50 × 35 mm21 parts2LMIT6ESP32
ESP32 E-Reader
IS7V4N
62.5 × 96.2 mm85 parts4LNo license3ESP32
Solana badge
spacemandev-git
77.6 × 116.3 mm81 parts2LNo license2ESP32
Dropsense v2
ParthDhiman32
62 × 47.5 mm38 parts2LNo license2ESP32
Lora pager
alx-alexpark
85 × 66 mm69 parts2LNo license1ESP32
OmniDrive
TLNKhanh
45 × 59.5 mm66 parts2LMIT1SnowBackpack
wandering-nora
39.6 × 18 mm62 parts2LCERN-OHL-S-2.01ESP32
Devotchi
hussamkoman
45 × 50 mm47 parts4LMIT1ESP32
Cc1101 receiver esp32
maxim75
49 × 55 mm39 parts4LNo license1ESP32
VRCBadge
Hebububu
102 × 80 mm34 parts4LNo license1Li-Po-Charger
valeronm
40 × 23 mm26 parts2LMIT1ESP32
Pr clock
tobycm
100 × 70 mm14 parts2LMIT1STM32
CC M7
OzanE1
40 × 65 mm126 parts4LLGPL-2.10STM32
CC M7
OzanE1
40 × 65 mm123 parts4LLGPL-2.10ESP32
Mk oniondao badge
majeedkhori
76.6 × 141.1 mm116 parts2LNo license0STM32
FOC
IpinZhu
50 × 70 mm112 parts4LMIT0ESP32
SkyRizz-ESPSOL
SkyRizzAI
40.6 × 40.6 mm70 parts2LCERN-OHL-S-2.00STM32
MiniMPE
adrienles
58.5 × 50.3 mm55 parts4LNo license0ESP32
MushROOM
karenquezada
96.4 × 100.4 mm54 parts2LNo license0STM32
Tenn0-toolchanger board
Tenn0
120 × 57.1 mm49 parts2LNo license0ESP32
ThermoBox
Focursed
49 × 64 mm43 parts2LNo license0ESP32
Voidboard
dark-Phoenix2077
30 × 65 mm41 parts2LNo license0RP2040/RP2350
Mage
vmshade
20.3 × 35 mm33 parts2LNo license0ESP32
ESP32-C3 True-S
EObianom
22.3 × 25.1 mm24 parts2LCC-BY-NC-4.00RP2040/RP2350
Skibidi album clicker
tobycm
30 × 70 mm23 parts2LMIT0ESP32
E ink dashboard
Nxyz-natan
69.6 × 94.2 mm20 parts2LNo license0- schematic only · 25 parts
Pico eurorack pico-
ovikveber
25 partsGPL-3.00 RP2040/RP2350
Mai pico nano touch
Isoheptane
99 × 18 mm5 parts2LMIT6ESP32
Dropsense reciever v2
ParthDhiman32
48 × 63.5 mm29 parts2LNo license2Mess-Sense+USBC
unicab369
99.1 × 99.1 mm440 parts2LNo license0ESP32
Panic button tiny
HenraL
38.2 × 38.3 mm16 parts2LMIT0
How designs wire the ME6211C33M5
Read from the KiCad layouts of 36 open source designs, one per repository: what each pin of the ME6211C33M5 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 32 of 36 designs, most often 1 µF (then 10 µF).
- The VOUT pin has a decoupling capacitor on 31 of 36 designs, most often 100 nF (then 1 µF).
- The CE pin is tied to 5V on 26 of 36 designs (a signal on 8).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 86% |
|
| VSSpin 2 | Connected to: GND 94% | — |
| CEpin 3 | Connected to: 5V 72% · a signal 22% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 3.3V 89% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Microfrank by rh1tech, Bluetooth minidisc by 17o2, Oniondao badge by OnionDAO-git and Expansion board v4 by naizhao.
The ME6211C33M5 in open source designs
The gallery holds 48 open source boards using the ME6211C33M5 from 38 GitHub repositories; a typical one measures about 60.3 × 64.5 mm and carries around 64 components.
68% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Microfrank by rh1tech.
Parts used alongside the ME6211C33M5
Microcontrollers on boards using the ME6211C33M5
What boards using the ME6211C33M5 are built for
ME6211C33M5: common questions
Where can I find a ME6211C33M5 reference design?
Each of the 48 boards on this page is a real design using the ME6211C33M5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ME6211C33M5 VIN pin?
The VIN pin has a decoupling capacitor on 32 of 36 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 36 open source designs using the ME6211C33M5.
What decoupling capacitors do designs use on the ME6211C33M5 VOUT pin?
The VOUT pin has a decoupling capacitor on 31 of 36 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 36 open source designs using the ME6211C33M5.
How is the ME6211C33M5 CE pin connected?
The CE pin is tied to 5V on 26 of 36 designs (a signal on 8). Counted from the KiCad layouts of 36 open source designs using the ME6211C33M5.
What parts are used alongside the ME6211C33M5?
The TP4056-42-ESOP8, CH340C, DW01A, USBLC6-2SC6 and ESP32-C3-WROOM-02 appear in the most repositories here.
Which microcontrollers do boards using the ME6211C33M5 use?
Most are built on ESP32 (23), STM32 (8), RP2040/RP2350 (7) and WCH CH32/CH55x (1).
How big is a typical board using the ME6211C33M5?
The median is 60.3 × 64.5 mm, and 68% are two-layer designs.
What is the most popular open source board using the ME6211C33M5?
By GitHub stars, Microfrank by rh1tech, with 65 stars.
Can I simulate one of these boards using the ME6211C33M5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.