5-MX-Switch-Module

ItsHotdogFred·Shortcut-3000·Modules/5-MX-Switch-Module/5-MX-Switch-Module.kicad_pcb

5-MX-Switch-Module layout, top view — open source board by ItsHotdogFred

About the 5-MX-Switch-Module

5-MX-Switch-Module is an open source PCB design by ItsHotdogFred, published on GitHub. It is a 2-layer board measuring 101.6 × 25.4 mm, with 12 components from 7 distinct parts.

Other key parts include the 24LC02 and MCP23008-xP. By type, the board carries 5 switches, 3 capacitors, 2 ICs, 1 connector and 1 resistor.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

Shortcut 3000 is a shortcut device which solves a big problem when buying a shortcut device. If you have already brought one before you may notice that some stuff on it go unused or aren't fit for your purpose. This leads to wasted space and wasted potential. To avoid this happening, Shortcut 3000 contains 12 magnetic pogo pads called modules which allow you to swap stuff on it. For example: Got a key you're not using and would much rather have a rotary encoder for managing sound? Well you can do that by swapping the key module with a rotary encoder!

5-MX-Switch-Module, from the project README
From the project README

Main components on the 5-MX-Switch-Module

5-MX-Switch-Module bill of materials (BOM)

12 components, 7 distinct parts.

QtyPartRefs
1
24LC02
U1
1
MCP23008-xP
U2
1
MagneticPogo_1x05_Male
J1
5
SW_Push
SW1, SW2, SW3, SW4, SW5
2
100nF
C1, C2
1
1uF
C3
1
10k
R1

5-MX-Switch-Module design files

The KiCad project lives in the ItsHotdogFred/Shortcut-3000 repository on GitHub; these links point at the commit this page was built from.

5-MX-Switch-Module: common questions

How big is the 5-MX-Switch-Module?

The 5-MX-Switch-Module measures 101.6 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 5-MX-Switch-Module?

12 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the 5-MX-Switch-Module design files?

From the ItsHotdogFred/Shortcut-3000 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 5-MX-Switch-Module design in my own project?

The repository has no license, so all rights stay with ItsHotdogFred. Use it as a reference, and ask the author before reusing the design.

More boards in Shortcut-3000

Similar boards