Shortcut-3000

ItsHotdogFred·Shortcut-3000

Shortcut-3000 PCB layout, top view — open source RP2040/RP2350 board by ItsHotdogFred

About the Shortcut-3000 PCB

Shortcut-3000 is an open source RP2040/RP2350 PCB design by ItsHotdogFred, published on GitHub. It is a 2-layer board measuring 105.5 × 82.5 mm, with 57 components from 5 distinct parts.

Its main chip is the RP2040-Zero, from the RP2040/RP2350 family. Other key parts include the TCA9548APWR. By type, the board carries 42 resistors, 12 connectors, 2 ICs and 1 module.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

Shortcut 3000 is a shortcut device which solves a big problem when buying a shortcut device. If you have already brought one before you may notice that some stuff on it go unused or aren't fit for your purpose. This leads to wasted space and wasted potential. To avoid this happening, Shortcut 3000 contains 12 magnetic pogo pads called modules which allow you to swap stuff on it. For example: Got a key you're not using and would much rather have a rotary encoder for managing sound? Well you can do that by swapping the key module with a rotary encoder!

Shortcut-3000, from the project README
From the project README

Main components on the Shortcut-3000

Shortcut-3000 bill of materials (BOM)

57 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TCA9548APWR
U1, U2
1
RP2040-Zero
A1
12
MagneticPogo_1x05_Female
J1, J2, J3, J4, J5, J6, J7, J8 +4
28
4.7k
R1, R2, R3, R4, R9, R10, R11, R12 +20
14
10k
R5, R6, R7, R8, R33, R34, R35, R36 +6

Shortcut-3000 design files

The KiCad project lives in the ItsHotdogFred/Shortcut-3000 repository on GitHub; these links point at the commit this page was built from.

Shortcut-3000: common questions

What microcontroller does the Shortcut-3000 use?

The Shortcut-3000 is built around the RP2040-Zero, from the RP2040/RP2350 family.

How big is the Shortcut-3000 PCB?

The Shortcut-3000 measures 105.5 × 82.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Shortcut-3000?

57 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Shortcut-3000 design files?

From the ItsHotdogFred/Shortcut-3000 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Shortcut-3000 design in my own project?

The repository has no license, so all rights stay with ItsHotdogFred. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Shortcut-3000 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Shortcut-3000

Similar boards