The zapfish variable supply
ItsKareem·the-zapfish-variable-supply·pcb/the-zapfish.kicad_pcb
About the The zapfish variable supply PCB
The zapfish variable supply is an open source PCB design by ItsKareem, published on GitHub. It is a 2-layer board measuring 34 × 34 mm, with 8 components from 8 distinct parts.
Other key parts include the LM317. By type, the board carries 2 connectors, 2 diodes, 1 IC, 1 capacitor and 1 resistor.
It belongs with the power & battery designs in this gallery.
From the project
An AC-to-DC Variable Power Supply (3V–12V) ⚡︎ ˖ ࣪
Main components on the The zapfish variable supply
The zapfish variable supply bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317 | TO-220 | U1 |
| 1 | CONN_01X02 Conn_01x02 | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 50K 5k | Potentiometer_Vishay_T93YA_Vertical | RV1 |
| 1 | KBP210 | SIP380W81P386L1470H1270Q4 | D1 |
| 1 | D | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 2200U 2200u | CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | 240 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
The zapfish variable supply design files
The KiCad project lives in the ItsKareem/the-zapfish-variable-supply repository on GitHub; these links point at the commit this page was built from.
The zapfish variable supply: common questions
How big is the The zapfish variable supply PCB?
The The zapfish variable supply measures 34 × 34 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the The zapfish variable supply?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the The zapfish variable supply design files?
From the ItsKareem/the-zapfish-variable-supply repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the The zapfish variable supply design in my own project?
The repository has no license, so all rights stay with ItsKareem. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k