AquarWorld - Circuito
About the AquarWorld - Circuito PCB
AquarWorld - Circuito is an open source PCB design by IvanBarrientos16, published on GitHub. It is a 2-layer board measuring 147.7 × 90.8 mm, with 69 components from 34 distinct parts.
Other key parts include the PC817, DEVKIT_V1_ESP32-WROOM-32 and L7805. By type, the board carries 22 resistors, 12 diodes, 9 connectors, 8 capacitors, 6 ICs and 5 transistors.
It belongs with the iot & wireless designs in this gallery.
Main components on the AquarWorld - Circuito
AquarWorld - Circuito bill of materials (BOM)
69 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | PC817 | SO-4_4.4x4.3mm_P2.54mm | U1, U3, U5, U7 |
| 1 | DEVKIT_V1_ESP32-WROOM-32 | MODULE_DEVKIT_V1_ESP32-WROOM-32 | U2 |
| 1 | L7805 | TO-252-2 | U6 |
| 5 | 2N7000 | SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 1 | MP3-PLAYER | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | SALIDA - RELAY 2 | TerminalBlock_bornier-3_P5.08mm | J4 |
| 1 | SENSOR ULTRASONICO | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | SALIDA - RELAY 3 | TerminalBlock_bornier-3_P5.08mm | J6 |
| 1 | SALIDA - RELAY 4 | TerminalBlock_bornier-3_P5.08mm | J7 |
| 1 | SALIDA - RELAY 1 | TerminalBlock_bornier-3_P5.08mm | J10 |
| 1 | 12V - GND | PinHeader_2x02_P2.54mm_Vertical | J13 |
| 1 | 5V - GND | PinHeader_2x04_P2.54mm_Vertical | J15 |
| 1 | ALIMENTACIÓN - 12V | TerminalBlock_bornier-2_P5.08mm | J27 |
| 1 | Buzzer | MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | JUMPER | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | RELAY 2 | Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | RELAY 3 | Relay_SPDT_SANYOU_SRD_Series_Form_C | K2 |
| 1 | RELAY 4 | Relay_SPDT_SANYOU_SRD_Series_Form_C | K3 |
| 1 | RELAY 1 | Relay_SPDT_SANYOU_SRD_Series_Form_C | K5 |
| 1 | POTENCIOMETRO | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | RV1 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | LED | LED_0805_2012Metric | D1, D2, D5, D7, D9 |
| 4 | 1N4007 | D_SMA | D3, D4, D6, D8 |
| 2 | LED | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D10, D11 |
| 1 | D_Bridge_+A-A | Diode_Bridge_Round_D9.8mm | D22 |
| 2 | 100nF | C_0805_2012Metric | C1, C2 |
| 4 | 10uF | CP_Elec_6.3x5.4 | C3, C6, C7, C8 |
| 1 | 2200uF | CP_Elec_10x10.5 | C4 |
| 1 | 1000uF | CP_Elec_8x10.5 | C5 |
| 4 | 120Ω | R_0805_2012Metric | R1, R6, R10, R15 |
| 5 | 33KΩ | R_0805_2012Metric | R2, R8, R12, R17, R36 |
| 5 | 1KΩ | R_0805_2012Metric | R3, R7, R11, R16, R39 |
| 4 | 470Ω | R_0805_2012Metric | R5, R9, R14, R18 |
| 3 | 220Ω | R_0805_2012Metric | R13, R28, R29 |
| 1 | 2KΩ | R_0805_2012Metric | R40 |
AquarWorld - Circuito design files
The KiCad project lives in the IvanBarrientos16/Rele-Wifi repository on GitHub; these links point at the commit this page was built from.
AquarWorld - Circuito: common questions
How big is the AquarWorld - Circuito PCB?
The AquarWorld - Circuito measures 147.7 × 90.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AquarWorld - Circuito?
69 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the AquarWorld - Circuito design files?
From the IvanBarrientos16/Rele-Wifi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AquarWorld - Circuito design in my own project?
The repository has no license, so all rights stay with IvanBarrientos16. Use it as a reference, and ask the author before reusing the design.
More boards in Rele-Wifi
Similar boards
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
L0 IMU MPU9250
Luos-io
20.3 × 15.2 mm7 parts2LMIT547
L0 USBA
20.3 × 15.3 mm19 parts2LMIT547
L0 Controller motor
20.3 × 15.3 mm11 parts2LMIT547
L0 Dynamixel
20.3 × 15.2 mm15 parts2LMIT547
L0 stepper driver
20.3 × 15.2 mm18 parts2LMIT547