Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025
About the Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 PCB
Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 is an open source ESP32 PCB design by IvanBarrientos16, published on GitHub. It is a 2-layer board measuring 63.7 × 54 mm, with 22 components from 17 distinct parts.
Its main chip is the ESP32-C3_SUPERMINI, from the ESP32 family. Other key parts include the L7805. By type, the board carries 5 connectors, 5 diodes, 5 resistors, 2 ICs, 2 capacitors and 1 transistor.
It belongs with the iot & wireless designs in this gallery.
Main components on the Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025
Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 bill of materials (BOM)
22 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3_SUPERMINI | MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | L7805 | TO-252-2 | U2 |
| 1 | 2N7000 | SOT-23 | Q1 |
| 1 | ALIMENTACIÓN-12V | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | 12V | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | SENSOR IFLAROJO (IR) | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | APAGADO/ENCENDIDO | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | PUENTE H - L298N | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J7 |
| 1 | Buzzer | MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | JUMPER | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 3 | LED | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D2, D3, D4 |
| 1 | 1N4007 | D_0805_2012Metric | D5 |
| 1 | 1000uF | CP_Elec_8x10.5 | C1 |
| 1 | 100uF | CP_Elec_6.3x5.8 | C2 |
| 4 | 220Ω | R_0805_2012Metric | R1, R3, R4, R5 |
| 1 | 33KΩ | R_0805_2012Metric | R2 |
Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 design files
The KiCad project lives in the IvanBarrientos16/Rele-Wifi repository on GitHub; these links point at the commit this page was built from.
Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025: common questions
What microcontroller does the Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 use?
The Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 is built around the ESP32-C3_SUPERMINI, from the ESP32 family.
How big is the Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 PCB?
The Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 measures 63.7 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025?
22 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 design files?
From the IvanBarrientos16/Rele-Wifi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 design in my own project?
The repository has no license, so all rights stay with IvanBarrientos16. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lanzador de pelotas - Iván Barrientos - ELECTRÓNICA 2025 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Rele-Wifi
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k