Displinux
About the Displinux PCB
Displinux is an open source PCB design by Ivansquark, published on GitHub. It is a 2-layer board measuring 57.9 × 65.4 mm, with 152 components from 61 distinct parts.
Other key parts include the DP83848C, SY8089AAAC, F133, XC6206P_2_8_MR and XC6206P_1_2_MR. By type, the board carries 66 capacitors, 54 resistors, 11 connectors, 9 ICs, 3 crystals and 3 diodes.
Main components on the Displinux
Displinux bill of materials (BOM)
152 components, 61 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DP83848C | LQFP-48_7x7mm_P0.5mm | U1 |
| 2 | SY8089AAAC | SOT-23-5 | U2, U4 |
| 1 | F133 | LQFP-128_14x14mm_P0.4mm | U3 |
| 1 | XC6206P_2_8_MR | SOT-23 | U5 |
| 1 | XC6206P_1_2_MR | SOT-23 | U6 |
| 1 | SY7201ABC | SOT-23-6 | U7 |
| 1 | W25N01KV | WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U8 |
| 1 | PAM8301 | SOT-23-6 | U9 |
| 1 | ASE-50MHZ ASE-50MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | 24M | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 2 | USB4105-GF-A | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1, J2 |
| 1 | AUDIOJACK4 AudioJack4 | Jack_3.5mm_PJ320D_Horizontal | J3 |
| 1 | CONN_02X10_COUNTER_CLOCKWISE Conn_02x10_Counter_Clockwise | PinHeader_2x10_P2.54mm_Vertical | J4 |
| 1 | HR911105A | RJ45_Hanrun_HR911105A_Horizontal | J5 |
| 1 | CONN_01X24_MOUNTINGPIN Conn_01x24_MountingPin | TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | J6 |
| 1 | CONN_01X06 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | CONN_01X40_MOUNTINGPIN Conn_01x40_MountingPin | TE_4-1734839-0_1x40-1MP_P0.5mm_Horizontal | J8 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J10 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x40_MountingPin | TE_4-1734839-0_1x40-1MP_P0.5mm_Horizontal | J11 |
| 2 | SW_SPST | SW_SPST_EVQPE1 | FEL1, RST1 |
| 1 | uSD_SMD | J_SD_Card-micro_socket_A | XS1 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 1 | D | D_2010_5025Metric | D5 |
| 2 | 2.2U 2.2u | L_Wurth_WE-LQSH-3012 | L1, L2 |
| 1 | 10U 10u | L_Wurth_WE-LQSH-3012 | L3 |
| 10 | 10U 10u | C_0603_1608Metric | C1, C2, C16, C17, C32, C34, C38, C42 +2 |
| 31 | 0.1U 0.1u | C_0603_1608Metric | C3, C4, C5, C6, C7, C12, C15, C18 +23 |
| 10 | 0.1UF 0.1uF | C_0603_1608Metric | C8, C9, C10, C11, C20, C21, C22, C24 +2 |
| 4 | 10u | C_0603_1608Metric | C13, C14, C65, C66 |
| 2 | 0.47U 0.47u | C_0603_1608Metric | C19, C27 |
| 1 | 10UF 10uF | CP_EIA-3216-10_Kemet-I | C23 |
| 4 | 18P 18p | C_0603_1608Metric | C28, C30, C31, C33 |
| 1 | 0.1U 4.7u | C_0603_1608Metric | C37 |
| 2 | 0.1U 10u | C_0603_1608Metric | C40, C44 |
| 1 | 470u | C_0603_1608Metric | C64 |
| 1 | 5.1K 10 | R_0603_1608Metric | R1 |
| 5 | 5.1K 51k | R_0603_1608Metric | R2, R3, R4, R5, R6 |
| 9 | 10K 10k | R_0603_1608Metric | R7, R8, R10, R11, R32, R34, R35, R36 +1 |
| 2 | 2R2 | R_0603_1608Metric | R9, R12 |
| 4 | 49R9 | R_0603_1608Metric | R13, R14, R15, R16 |
| 1 | 5.1K 5.1k | R_0603_1608Metric | R17 |
| 1 | 7.87K 7.87k | R_0603_1608Metric | R18 |
| 2 | 220 | R_0603_1608Metric | R19, R21 |
| 10 | 2.2K | R_0603_1608Metric | R20, R22, R23, R24, R26, R27, R28, R42 +2 |
| 2 | 1k | R_0603_1608Metric | R25, R38 |
| 1 | 4.87K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
| 1 | 15K 15k | R_0603_1608Metric | R30 |
| 1 | 68K 68k | R_0603_1608Metric | R31 |
| 1 | 5k | R_0603_1608Metric | R33 |
| 1 | 10k | R_0603_1608Metric | R37 |
| 1 | 200K 200k | R_0603_1608Metric | R39 |
| 2 | 100K 100k | R_0603_1608Metric | R40, R45 |
| 1 | 240 | R_0603_1608Metric | R41 |
| 1 | 2R2 5R1 | R_0603_1608Metric | R46 |
| 2 | 10K 150K | R_0603_1608Metric | R48, R49 |
| 1 | 10K 2k | R_0603_1608Metric | R50 |
| 1 | 10K 51k | R_0603_1608Metric | R51 |
| 2 | 10K 5R1 | R_0603_1608Metric | R52, R53 |
| 1 | 10K 0 | R_0603_1608Metric | R54 |
Displinux design files
The KiCad project lives in the Ivansquark/displinux repository on GitHub; these links point at the commit this page was built from.
Displinux: common questions
How big is the Displinux PCB?
The Displinux measures 57.9 × 65.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Displinux?
152 components, from 61 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Displinux design files?
From the Ivansquark/displinux repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Displinux design in my own project?
The repository has no license, so all rights stay with Ivansquark. Use it as a reference, and ask the author before reusing the design.
