9 open source boards using the PAM8301
Real designs built with the PAM8301, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
CircuitPythonBadge
neubauek
90 × 90 mm62 parts2LNo license4Xilwatch hw
xil-se
37.8 × 50 mm64 parts2LNo license2PAM8301 Circuit
engali94
20 × 11 mm8 parts2LNo license1Displinux
Ivansquark
57.9 × 65.4 mm152 parts2LNo license0STM32
Mesh
dholth
50 × 50 mm50 parts2LNo license0- schematic only · 14 partsRP2040/RP2350
Meloled
jacraul
14 partsNo license0 Microchip SAM
Adafruit Circuit Playground Express
hulkco
50.8 × 50.6 mm78 partsNo license15Microchip SAM
Adafruit PyPortal
hulkco
88.3 × 64.5 mm75 partsNo license15Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487
How designs wire the PAM8301
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the PAM8301 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a series resistor on 5 of 7 designs, most often 47 kΩ (then 150 kΩ).
- The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 1 µF).
- The SD pin has a pull-up to 3.3V on 3 of 7 designs, most often 10 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 100% | — |
| INpin 3 | Connected to: Signal 100% |
|
| SDpin 4 | Connected to: The microcontroller 43%, a connector 29% |
|
| VDDpin 5 | Connected to: 3.3V 86% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenDropV4 by GaudiLabs, Adafruit Circuit Playground Express by hulkco, CircuitPythonBadge by neubauek and Xilwatch hw by xil-se.
The PAM8301 in open source designs
The gallery holds 9 open source boards using the PAM8301 from 8 GitHub repositories; a typical one measures about 54.3 × 57.5 mm and carries around 64 components.
100% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is OpenDropV4 by GaudiLabs.
Parts used alongside the PAM8301
Microcontrollers on boards using the PAM8301
What boards using the PAM8301 are built for
PAM8301: common questions
Where can I find a PAM8301 reference design?
Each of the 9 boards on this page is a real design using the PAM8301. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the PAM8301 IN pin?
The IN pin has a series resistor on 5 of 7 designs, most often 47 kΩ (then 150 kΩ). Counted from the KiCad layouts of 7 open source designs using the PAM8301.
What decoupling capacitors do designs use on the PAM8301 VDD pin?
The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the PAM8301.
What pull-up resistor is used on the PAM8301 SD pin?
The SD pin has a pull-up to 3.3V on 3 of 7 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 7 open source designs using the PAM8301.
Which microcontrollers do boards using the PAM8301 use?
Most are built on Microchip SAM (4), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the PAM8301?
The median is 54.3 × 57.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the PAM8301?
By GitHub stars, OpenDropV4 by GaudiLabs, with 487 stars.
Can I simulate one of these boards using the PAM8301 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.