3 open source boards using the F133

Real designs built with the F133, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The F133 in open source designs

The gallery holds 3 open source boards using the F133 from 2 GitHub repositories; a typical one measures about 56 × 56 mm and carries around 137 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is XassetteAsterisk by SdtElectronics.

F133: common questions

Where can I find a F133 reference design?

Each of the 3 boards on this page is a real design using the F133. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the F133?

The SY7201ABC, SY8089AAAC, W25Q32JVSS and XC6206PXXXMR appear in the most repositories here.

How big is a typical board using the F133?

The median is 56 × 56 mm, and 100% are two-layer designs.

What is the most popular open source board using the F133?

By GitHub stars, XassetteAsterisk by SdtElectronics, with 229 stars.

Can I simulate one of these boards using the F133 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part