Epaper hat
jabr0ni·epaper-hat·Hardware/PCB/28P-FPC-SPI-Debug.kicad_pcb
About the Epaper hat
Epaper hat is an open source PCB design by jabr0ni, published on GitHub. It is a 2-layer board measuring 97.4 × 36.8 mm, with 40 components from 21 distinct parts.
Other key parts include the RT9193-33GB and TXB0108PW. By type, the board carries 16 capacitors, 9 resistors, 3 transistors, 3 connectors, 3 test points and 3 diodes.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
PCB breakout board for e-paper module
Main components on the Epaper hat
Epaper hat bill of materials (BOM)
40 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RT9193-33GB | SOT94P279X129-5N | U1 |
| 1 | TXB0108PW | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | SI1308EDL Si1308EDL | SOT-323_SC-70 | Q1 |
| 1 | AO3401A | SOT-23 | Q2 |
| 1 | S8050 | S8050 | Q3 |
| 1 | CONN_01X08 Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | CONN_01X24 Conn_01x24 | PinHeader_2x12_P2.54mm_Vertical | J2 |
| 1 | SFV24R-1STBE1HLF | GCT_FFC2B28-24-G-1x24 | J3 |
| 3 | ~ | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2, TP3 |
| 3 | MBR0530 | D_SOD-123 | D1, D2, D3 |
| 1 | L_Iron | IND_LPS4018-104MRC | L1 |
| 7 | 1U/50V 1u/50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C5, C7, C9, C10 |
| 2 | 0.1U/50V 0.1u/50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C13 |
| 3 | 1U/25V 1u/25V | CAPC1608X90N | C6, C8, C14 |
| 2 | CL21A475KBQNNNE | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 1u/50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C16 |
| 2 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R7 |
| 1 | 3R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 2 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R6 |
| 3 | 47K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
Epaper hat design files
The KiCad project lives in the jabr0ni/epaper-hat repository on GitHub; these links point at the commit this page was built from.
Epaper hat: common questions
How big is the Epaper hat?
The Epaper hat measures 97.4 × 36.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Epaper hat?
40 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Epaper hat design files?
From the jabr0ni/epaper-hat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Epaper hat design in my own project?
The repository has no license, so all rights stay with jabr0ni. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k