8 open source boards using the RT9193-33GB
Real designs built with the RT9193-33GB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Nes shell
TheBadZhang
72 × 44 mm54 parts6LNo license1Epaper hat
jabr0ni
97.4 × 36.8 mm40 parts2LNo license1Cnal+Fonte
NailsonChagas
65.5 × 78.5 mm54 parts2LNo license0WCH CH32/CH55x
CH551G DEVKIT V0
trngzng
23 × 30 mm25 parts2LNo license0- schematic only · 17 parts
ATSMiniBT
funk222
17 partsNo license0 STM32
UsbMeter2
TheBadZhang
17.5 × 40.3 mm40 parts2LNo license0WCH CH32/CH55x
CH551G DEVKIT V0 - Copy
trngzng
92.3 × 90.2 mm25 parts2LNo license0Fonte
NailsonChagas
23 × 50 mm15 parts2LNo license0
How designs wire the RT9193-33GB
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RT9193-33GB connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 4.7 µF).
- The BP pin has a capacitor to GND on 4 of 5 designs, most often 22 nF (then 1 µF).
- The EN pin is tied to 5V on 4 of 5 designs.
- The VOUT pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 80% · a signal 20% |
|
| GNDpin 2 | Connected to: GND 80% · a signal 20% | — |
| ENpin 3 | Connected to: 5V 80% · a signal 20% | — |
| BPpin 4 | Connected to: Signal 100% |
|
| VOUTpin 5 | Connected to: 3.3V 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Epaper hat by jabr0ni, Nes shell by TheBadZhang, Cnal+Fonte by NailsonChagas and UsbMeter2 by TheBadZhang.
The RT9193-33GB in open source designs
The gallery holds 8 open source boards using the RT9193-33GB from 6 GitHub repositories; a typical one measures about 65.5 × 44 mm and carries around 33 components.
86% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Nes shell by TheBadZhang.
Microcontrollers on boards using the RT9193-33GB
What boards using the RT9193-33GB are built for
RT9193-33GB: common questions
Where can I find a RT9193-33GB reference design?
Each of the 8 boards on this page is a real design using the RT9193-33GB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the RT9193-33GB VIN pin?
The VIN pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the RT9193-33GB.
How is the RT9193-33GB BP pin connected?
The BP pin has a capacitor to GND on 4 of 5 designs, most often 22 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the RT9193-33GB.
How is the RT9193-33GB EN pin connected?
The EN pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RT9193-33GB.
Which microcontrollers do boards using the RT9193-33GB use?
Most are built on WCH CH32/CH55x (2) and STM32 (2).
How big is a typical board using the RT9193-33GB?
The median is 65.5 × 44 mm, and 86% are two-layer designs.
What is the most popular open source board using the RT9193-33GB?
By GitHub stars, Nes shell by TheBadZhang, with 1 stars.
Can I simulate one of these boards using the RT9193-33GB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.