Rf mixed signal security game
jackpham-rgb·rf-mixed-signal-security-game·hardware/kicad/ascam1.net
About the Rf mixed signal security game PCB
Rf mixed signal security game is an open source STM32 PCB design by jackpham-rgb, published on GitHub under the MIT license. It is a board, with 64 components from 32 distinct parts.
Its main chip is the STM32G431CBU6, from the STM32 family. Other key parts include the AP2112K-3.3, 74LVC1G08, 74LVC1G86 and 74LVC1G04. By type, the board carries 20 capacitors, 13 resistors, 10 ICs, 7 transistors, 5 connectors and 4 test points.
From the project
Can a chip hide its power and RF leakage by randomizing its clock and dummy noise? A game-theory simulator and CLI tool, checked with cross-fitting and exact math.
ascam1.net is a KiCad netlist of the full rev 2 board: 64 parts, 40 nets, and 177 pin connections, each with its footprint. It is generated by makenetlist.py, which looks up every pin number by name in the official KiCad symbol libraries and checks it against the footprint's pads. NETLIST.md is the same data in a readable table, and ../bom.csv` comes from the same script.
Main components on the Rf mixed signal security game
Rf mixed signal security game bill of materials (BOM)
64 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | STM32G431CBU6 | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 4 | 74LVC1G08 | SOT-353_SC-70-5 | U3, U5, U6, U7 |
| 1 | 74LVC1G86 | SOT-353_SC-70-5 | U4 |
| 3 | 74LVC1G04 | SOT-353_SC-70-5 | U8, U9, U10 |
| 7 | DMG2302U | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 1 | 8 MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | SMA conducted | SMA_Amphenol_132289_EdgeMount | J1 |
| 1 | SMA trigger | SMA_Amphenol_132289_EdgeMount | J2 |
| 1 | SMA EM loop | SMA_Amphenol_132289_EdgeMount | J3 |
| 1 | SWD | Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J4 |
| 1 | USB-C power | USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J5 |
| 4 | M3 | MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | LOOP_START | TestPoint_Pad_D1.0mm | TP1 |
| 1 | LOOP_END | TestPoint_Pad_D1.0mm | TP2 |
| 1 | SHUNT_HI | TestPoint_Pad_D1.0mm | TP3 |
| 1 | SHUNT_LO | TestPoint_Pad_D1.0mm | TP4 |
| 1 | 1u | C_0603_1608Metric | C1 |
| 1 | 10u | C_0805_2012Metric | C2 |
| 14 | 100n | C_0402_1005Metric | C3, C4, C5, C6, C7, C12, C13, C14 +6 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7u | C_0603_1608Metric | C8 |
| 1 | 3.3p | C_0402_1005Metric | C9 |
| 2 | 10p | C_0402_1005Metric | C10, C11 |
| 1 | 1R 0.1% | R_1206_3216Metric | R1 |
| 1 | 49.9 | R_0402_1005Metric | R7 |
| 1 | 100 | R_0402_1005Metric | R8 |
| 2 | 5.1k | R_0402_1005Metric | R9, R10 |
| 1 | 10k | R_0402_1005Metric | R11 |
| 2 | 100 | R_1206_3216Metric | R12, R15 |
| 2 | 150 | R_1206_3216Metric | R13, R14 |
| 2 | 301 | R_1206_3216Metric | R16, R17 |
| 1 | 200 | R_1206_3216Metric | R18 |
Rf mixed signal security game design files
The KiCad project lives in the jackpham-rgb/rf-mixed-signal-security-game repository on GitHub; these links point at the commit this page was built from.
- Netlisthardware/kicad/ascam1.net
Rf mixed signal security game: common questions
What microcontroller does the Rf mixed signal security game use?
The Rf mixed signal security game is built around the STM32G431CBU6, from the STM32 family.
How many components are on the Rf mixed signal security game?
64 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rf mixed signal security game design files?
From the jackpham-rgb/rf-mixed-signal-security-game repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Rf mixed signal security game design in my own project?
Yes, under the terms of its MIT license, which jackpham-rgb chose for the repository.
Can I test firmware for the Rf mixed signal security game without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k