18 open source boards using the 74LVC1G86

Real designs built with the 74LVC1G86, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the 74LVC1G86

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LVC1G86 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF.
  • Pin 1 has a resistor to GND on 4 of 7 designs, most often 1.5 kΩ (then 10 kΩ).
  • Pin 2 has a resistor to GND on 4 of 7 designs, most often 1.5 kΩ (then 0 Ω).
Pin 1Connected to: The microcontroller 29%
  • Resistor to GND on 57% · 1.5 kΩ (1), 10 kΩ (1), 5.1 kΩ (1)
Pin 2Connected to: A connector 29%
  • Resistor to GND on 57% · 1.5 kΩ (1), 0 Ω (1), 5.1 kΩ (1)
GNDpin 3Connected to: GND 100%
VCCpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 86% · 100 nF (11)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-OCTAVIA by freeDSP, SimpleFC G by wangyeee, Cft ctl by alexiosc and Opensync by ErichZimmer.

The 74LVC1G86 in open source designs

The gallery holds 18 open source boards using the 74LVC1G86 from 8 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 217 components.

88% use four copper layers or more, and 83% carry an open source license.

The most starred is FreeDSP-OCTAVIA by freeDSP.

Parts used alongside the 74LVC1G86

Microcontrollers on boards using the 74LVC1G86

74LVC1G86: common questions

Where can I find a 74LVC1G86 reference design?

Each of the 18 boards on this page is a real design using the 74LVC1G86. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC1G86 VCC pin?

The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 74LVC1G86.

What resistor goes on the 74LVC1G86 pin 1?

Pin 1 has a resistor to GND on 4 of 7 designs, most often 1.5 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the 74LVC1G86.

What resistor goes on the 74LVC1G86 pin 2?

Pin 2 has a resistor to GND on 4 of 7 designs, most often 1.5 kΩ (then 0 Ω). Counted from the KiCad layouts of 7 open source designs using the 74LVC1G86.

What parts are used alongside the 74LVC1G86?

The 74LVC1G04, 74LVC1G08 and 74LVC1G17 appear in the most repositories here.

Which microcontrollers do boards using the 74LVC1G86 use?

Most are built on RP2040/RP2350 (9), STM32 (4) and PIC (2).

How big is a typical board using the 74LVC1G86?

The median is 160 × 100 mm, and 12% are two-layer designs.

What is the most popular open source board using the 74LVC1G86?

By GitHub stars, FreeDSP-OCTAVIA by freeDSP, with 19 stars.

Can I simulate one of these boards using the 74LVC1G86 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part